B_S-3WR2
1 /3Pages

Catalog excerpts

DC/DC Converter B S-3WR2 Series 3W, fixed input voltage, isolated & unregulated single outputPatent Protection RoHS FEATURES • Operating temperature range: -40'C to +85'C • Ultra Compact SIP package • Isolation voltage: 1.5K VDC • High power density • No external component required • International standard pin-out B_S-3WR2 series are specially designed for applications where an isolated voltage is required in a distributed power supply system. They are suitable for J. Where the voltage of the input power supply is stable (voltage variation: ± J0% Vrn); 2 Where isolation between input and output is necessary (isolation voltage ^J500VDC); 3. Where the output voltage regulation and the ripple & noise of the output voltage is not strictly required; 4 Typical application: digit circuit condition; normal low-frequency artificial circuit condition; relay drive circuit condition, etc. Selection Guide MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 1

DC/DC ConverterB_S-3WR2 Series Isolation Capacitance MORN5UN GUANGZHOU SCIENCE & TECHNOLOGY CO.,LTD. MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation

Open the catalog to page 2

3. Output load requirements In order to ensure the converter can work reliably with high efficiency, the minimum load should not less than 10% rated load when it is used. If the needed power is indeed small, please parallel a resistor on t the output side (The sum of the efficient power and resistor consumption power is not less than 10%). THIRD ANGLE PROJECTION-©- Front View Bottom View Unit :mm[inch] 1. Packing information please refer to Product Packing Information which can be downloaded from www.mornsun-power.com. Packing bag number: 58200001; 2. If the product is not operated within the...

Open the catalog to page 3