Overview
The document describes an olive oil processing plant made in Italy, specifically the FORMA 500-750-1000 3-4GL_Q models. The plant includes a knife crusher, mixers, and a decanter system designed for efficient oil extraction.

Specifications
- The plant features a knife crusher mounted on a separate frame with a transferring pump to move the paste to the mixers.
- The mixers have a capacity of 3x300 kg for the 500 and 750 models, and 3x400 kg or 4x300 kg for the 1000 model.
- Hourly production capacities are 500 kg, 750 kg, and 1000 kg respectively.
- Power requirements are 15 kW for the 500 model, 22.5 kW for the 750 model, and 28.5 kW for the 1000 model.

Procedures
- The paste is transferred from the mixers directly to the decanter.
- The pump is controlled by a variable speed drive to adjust the paste quantity to the decanter.
- An electrical heating system with a temperature controller manages the paste temperature.

Decanter Features
- Designed to handle paste at low temperatures with two exits: one for oil and another for water and husks.
- Water addition during extraction ranges from 0 to 10%.
- The internal screw is designed for better clarification with wear-proof reinforcements.
- The decanter starts via a hydraulic joint, and oil nozzle exits are adjustable.
- A motorized auger is used for external husks discharge.
- The stainless steel cover is openable for easy cleaning.

Dimensions
- FORMA 750 3GL_Q dimensions: A = 930 cm, B = 205 cm, C = 185 cm.

Recommendations
- Regular cleaning is facilitated by the openable covers on both the mixers and decanter.
- Adjust the variable speed drive and temperature controller to optimize paste processing and extraction efficiency.