TROUGH-TYPE CONVEYOR • 20’ long trough-type log conveyors. • 2000 Series hydraulic drive to handle up to 30’ conveyors. • 13” wide WD-110 conveyor chain. • 1” x 2” cross bars welded under chain bed every 2’. chain bed is 3/4” AR plate. • Conveyor constructed from 1/2” formed steel plate with 3/8” gussets every 4’ S P E C I F I C AT I O N S G E N E R AL 25’ Long conveyor(standard) with W-110 conveyor chain or (optional heavy duty track type chain Adjustable idler and drive sprockets 2,3, or 4 arm kickers-automatic or manual-can be installed either right or left Leg packages available to meet customer’s requirements Hydraulix or electric drive Operates at a constant 120 feet per minute 1/2” or 5/8 formed steel pan Note: Specifications may vary with equipment options KICKER O P T I O N S Plate kickers Per Arm 2-arm manual kickers 3-arm manual kickers 4-arm manual kickers Convert to auto kickers Leg Package for a 20’ - 25’ conveyor with 2 sets of legs Leg Package for a 26’ - 40’ conveyor with 3 sets of legs Leg Package for a 41’ - 65’ conveyor with 4 sets of legs Leg Package for a 66’ - 80’ conveyor with 5 sets of legs • Longer or shorter trough type conveyor with WD-110 chain • 13” track type chain in lieu of standard WD-110 conveyor chain • 13” x 3/4” UHMW Duralite conveyor chain wear strip • 19” x 3/4” UHMW Duralite conveyor chain wear strip • 2000 Series jackshaft reduction drive for conveyors 35’ - 65’ in length • Convert to heavy duty 19” wide trough type conveyor with track type chain and 2000 Series hydraulic jackshaft drive • Longer or shorter conveyor with 19” track type chain • 10,000 Series conveyor drive in lieu of standard 2000 on 19” wide conveyor • Log stop post (bolt on style) • Convert to 3/8” or 5/8” panning in lieu of standard 1/2” • WD 120 chain in lieu of 110 • Stop plate on end of trough • S-Drive • Conver