FEATURES Sloped Infeed System consists of one 40" (101.6 cm) diameter top compression feed roll with internal drive and a 50" (127 cm) wide x 11'5" (3.47 m) long live floor equipped with four strands of WDH-120 chain » 14" (35.56 cm) diameter bottom feed wheel » Straight discharge chute, including hydraulically operated chip deflect with vertical and horizontal adjustment and clean-out door » Wireless remote control with a 60' (18.28 m) tethered remote back-up system for chipper operation. Functions include forward/reverse of feed works, up and down of top feed roll, operation of chip discharge chute and throttle » Hydraulic hinged door allows quick and easy access for changing knives » Independent drum drive tensioning system for ease of adjustment » Large platforms on both sides for easy drum maintenance » Consolidated area for oil and hydraulic filters, easily accessible from ground or maintenance platform » Automatic reversing fan system » 11-HP (8.2 kW) air compressor with lockable enclosure » PT Tech HPTO15 hydraulic clutch CHIPPER ASSEMBLY » Drum diameter: 48" (121.92 cm) » Drum width: 55 V2" (140.97 cm) » Chipper knives (10): 11"x 7 W x %" thick (27.94 cm x 18.57 cm x 1.9 cm) » Counter knives (10): 11" x 6 3/8" x ^" thick (27.94 cm x 16.19 cm x 1.27 cm) » Knives and counter knives are Babbitt-style Aggressive, sloped live floor and large Advantage 3™ Drum creates more uniform chips Morbark Integrated Control Systems I