• Double door opening for huge access area to mill • (2) 4 groove, 5V belts to the mill • 2 groove, 5V belt to the hydraulic pump • 2 usable edge, repalceable anvil • Easily removed/rotated anvil for fast reaplacement • Patent pending variable force, constant down pressure hydraulic system with feed control • Hammermill rods can be configured to be removed from either side • Stacking /discharge conveyor Note: Specifications may vary with equipment options Outfeed Conveyor, consisting of: 9’ level, 8’ upright dual C188 drag chain conveyor that discharges at 6’ 15’ height. 3/16” x 1-1/2” x 2-1/2” angle iron flites on 15” center. Constructed from 7 gauge steel. Hydraulic direct lock drive with chain speeds up to 70’ per minute Infeed vibrating conveyor: 20’ long x 30” wide x 10” high straight sides. Conveyor formed of 3/8” panning and includes 10-HP electric drive Infeed belt conveyor: 20’ long x 30” wide x 10” high straight sides. Conveyor formed of 3/8” panning and includes smooth belt and hydraulic drive Additional length by foot for vibrating conveyor Additional length by foot for belt conveyor Additional length by foot for outfeed conveyor Hydraulic drive for infeed in lieu of electric (vibrating conveyor) Direct coupled motor Separate 25-HP motor to run hydraulic pump .