MATERIAL HANDLING CONVEYOR S TA N DARD EQUIPMENT - 14” WIDE • 20’ long x 14” wide paddle type waste conveyor with hydrulic drive. • Conveyor is fabricated from 10 gauge formed steel panning with enclosed chain return. • Headshaft and idler shaft are 1-3/4” diameter. C-188 chain with hardwood flited on 24” centers or 81X chain and plastic Driscope paddles on 24” centers. S TA N DARD EQUIPMENT - 24” Wide • 20’ long x 24” wide paddle type waste conveyor complete with hydraulic drive • Conveyor is fabricated from 10 gauge formed steel panning with enclosed chain return. • Headshaft and idler shaft are 2-7/16 diameter. C-188 chain with hardwood flites on 24” centers or 81X chain and plastic Driscope paddles on 24” centers Note: Specifications may vary with equipment options 5 HP electric drive in lieu of hydraulic drive, includes 5 HP motor, base, and V-belt drive LESS starter ( to accommodate up to 30’ conveyors) 10 HP electric drive in lieu of hydraulic drive, includes 10 HP motor, base, and V-belt LESS starter (to accommodate up to 60’ conveyors) Legs for upright conveyor, 14’ wide per set (up to 40’ conveyors) Legs for upright conveyor, 24” wide per set (up to 40’ conveyors) Extra set of legs for upright conveyors - 40’ - 60’ in length 24” ewide feed hopper 14” wide feed hopper RECOMMENDED OPERATING SETTINGS Recommended maximum slope is 35 degrees Wooden paddles on 15” or 30” centers 2,000 series Char-Lynn hydraulic drive Drag chain conveyor complete with hydraulic drive