FEATURES » The hydraulic chipper hood allows for easy knife access, while the 23" (58.42 cm) chipping diameter tackles some of the larger trees. With its 75" (190.5 cm) chipper disc, the 23X is able to chip large volumes of wood » 75" (190.5 cm) diameter x 5" (12.7 cm) thick three-knife chipper disc with LH rotation » Two-wheel hydraulic feed system: One 28.75" x 42" (73 cm x 106.68 cm) top feed wheel and one 13" x 42" (33.2 x 106.68 cm) bottom feed wheel Each disc is fabricated from plate steel Unrestricted infeed with dual Platform for general chipper and put through ultrasonic testing feed wheel disc maintenance Large work platform for general chipper disc maintenance Remote control with a tethered remote back-up system Morbark Integrated Control Systems (MICS) diagnostic system monitors pressures, temperatures, clutch systems and engine efficiency to maximize performance » Reversing fan » Dirt separator with deflector » Hydraulic swivel/telescoping discharge spout » 11-HP (8.2 kW) air compressor » Light package » Rear hydraulic stabilizers OTHER SPECIFICATIONS » Chip size: 5/a", %", 7/a", 1" (mm: 15.88, 19, 22.22, 25.4) » Knives (3): 23" x 5" x ^" (58.42 cm x 12.7 cm x 1.27 cm) OPTIONS » 4-Knife disc in lieu of standard 3-knife » ESPAR heating system for cold-weather start METRIC Chipping Capacity MORBARK www.morbark.com 800.831.0042 SPECIFICATIONS MAY VARY WITH EQUIPMENT OPTIONS