Vane-type air motor provides more power and rigidity for large, deep holes and contours. For all Moore Jig Grinders. Standard equipment - Cat. No. 13000-A (inch) - Cat. No. 13000-AM (metric) Air-turbine type electronically balanced for minimum vibration and long life. High thrust capacity for bottom, face, and shoulder grinding. Standard equipment - Cat. No. 1350-AT (inch) With ceramic bearings - Cat. No. 1350-C1 Air-turbine type electronically balanced for minimum vibration and long life. Integral collet and collet nut are externally and internally thread-ground for maximum concentricity and balance. Standard equipment - Cat. No. 51822-A (inch) With ceramic bearings - Cat. No. 51822-C1 For grinding holes 1/8 - 1 in. dia. Replacement hose Grinding Wheels A wide range of abrasives are available to meet a variety of applications. Free grinding wheel catalogs are available. Standard equipment - Cat. No. 1350-TM (inch to metric) With ceramic bearings - Cat. No. 1350-C2 For grinding holes 5/16 - 3 1/2 in. dia. (7,9, - 88.9 mm dia.) Standard equipment - Cat. No. 1350-MM (metric) (10 mm spindle ID) With ceramic bearings - Cat. No. 1350-C3 For grinding holes 7,0 - 88,0 mm dia. Standard equipment - Cat. No. 51822-1—MM (metric) With ceramic bearings - Cat. No. 51822-C3 For grinding holes 3,2 mm - 25,4 mm dia. 1 - Collet reducer 6 mm to 3 mm 1348-M 1 - Wrench (3/4 in. opening) 80113 Standard equipment - Cat. No. 51822-AM (inch to metric) With ceramic bearings- Cat. No. 51822-C2 For grinding holes 1/8 in - 25,4 mm dia. 1 - Collet reducer 1/8 in. to 3 mm 1345-M 1 - Wrench (3/4 in. opening) 80113 Need more Information: Call: (203) 366-3224 [email protected] [email protected] Visit us on the web: mooretool.com

Minimum hole size that can be ground is limited to the size of mandrel available. Air-turbine type designed exclusively for grinding very small holes. Accept only 1/8 in. wheel shank diameter (or 3 mm shank diameter). Standard equipment - Cat. No. 72244-A (inch) With ceramic bearings - Cat. No. 72244-C1 Standard equipment - Cat. No. 72244-AM (metric) With ceramic bearings - Cat. No. 72244-C2 1 - Rubber boot 1 - Chained key-wrench 1 - Half pint of oil 1-Grinding Wheel 85413-BC85513-BC 175,000 rpm Grinding Head Minimum hole size that can be ground is limited to the size of mandrel available. Air-turbine...