D-BOX ® Field-Mount Enclosure for Head-Mount & Hockey-Puck Instruments June 2009 Handles a Wide Array of Instrumentation The D-BOX ® accommodates temperature, pressure, level and ow transmitters, meters, indicators, analyzers, integrators, and many other head-mount and hockey-puck instruments. For Hazardous and General Locations The D-BOX meets standards for enclosing indoor and outdoor electronic instruments approved for use in: U.S. Practice European Practice Safeguards Expensive Instruments Designed to meet NEMA 4X, IP66 ratings, the D-BOX is resistant to ultraviolet rays and chemicals. Its high-impact materials protect instruments even when they must be installed in harsh eld conditions. Replaces Costly Explosion-Proof Enclosures At a fraction of the cost, the D-BOX provides the right level of protection in areas where explosion-proof certications are not required. Clear and Solid Covers Instrument indicators, such as process displays and alarm LEDs, can be clearly viewed without removing the D-BOX front cover. The solid cover is the answer for non-indicating instruments. Single and Multiple Instrument Models The high body D-BOX handles high prole instruments, or an instrument and indicator mounted “piggyback”. Low body models are ideal for low prole instruments. Low Body Clear Cover Standard Entry Ports and Fittings The D-BOX is available with single and dual entry ports, and with standard conduit ttings. Models without entry ports and conduit ttings are also available. Surface and Pipe Mount Installation Lightweight and easy to install, the D-BOX conveniently installs on a surface or 2-inch pipe. Custom Brackets for OEM Applications Our team of engineers will work with you to design and provide any special installation hardware that may be required to integrate your instrument into U.S. Patent No. D395831. D-Box is a registered trademark of Moore Industries-International, Inc. The Interface Solution Experts • www.miinet.com

D-BOX ® Field-Mount Enclosure for Head-Mount & Hockey-Puck Instruments Specications Body Copper-free aluminum with Polyester powdercoat Polycarbonate (ame retardant to UL V-O and U.V. stabilized for extended outdoor use) Body Screws Stainless steel Conduit U.S. Standard: 1/2-14 NPT Fittings female (die cast zinc) Weight Low Body (without conduit ttings): 510 g (1lb, 2 oz) High Body (without conduit ttings): 794 g (1 lb, 12 oz) Standard Conduit Fitting: 85 g each (3 oz each) 2-inch Pipe Mount Hardware: 142 g (5 oz) *Other conduit tting types and materials are available. Consult the factory for...