BULLET - Wireless HART Adapter
1 / 6Pages

WirelessHART® Adapter for Use with Wired HART® Field Devices March 2013 Description The BULLET WirelessHART Adapter enables new and existing wired smart HART eld devices, non-smart analog eld devices and remote HART I/O from any supplier to communicate with host applications using WirelessHART technology. Handles All Registered Smart HART “Digital” Devices—Using the industry-standard HART protocol, the BULLET can be used to transmit the primary, secondary, third and fourth variable process data from smart HART devices, valves and I/O, as well as HART instrument diagnostics, alarm data and custom commands. Just one or up to eight* HART (multidropped) devices connect to a single BULLET making it an economical choice for sending multiple HART signals on a single wireless data link. The BULLET can be connected directly to a HART device or anywhere along the HART 4-20mA loop at a junction box. It supports both HART MESH and STAR network congurations. Non-Smart “Analog” Devices Too—The BULLET accepts an analog (i.e., 4-20mA) signal and provides a proportional digital value in scaled engineering units at the opposite end of the data link through a WirelessHART gateway and, ultimately, to a host system. This is ideal for converting non-HART legacy analog instruments to wireless devices. Loop- or DC/Battery-Powered—The BULLET can use existing loop-power (scavenging), or can be powered directly by a DC power supply, or by an external battery/solar system. When loop-powered, the BULLET saves on the long-term cost of battery maintenance, replacement and disposal programs. With external battery power, the BULLET provides battery power management by cycling the HART capable eld device power, and taking and transmitting periodic process readings, and diagnostic and alarm data. *Using Moore Industries’ TCM Temperature Concentrator Module, up to 16 HART digital signals incorporating PV (Temperature) and SV (Reference Junction Compensation) variables and diagnostics and alarm data can be transmitted in a WirelessHART network. See page 4 for additional information. Consult the factory for details. The BULLET WirelessHART Adapter can be installed directly to one smart HART or non-smart analog eld device or can multidrop up to eight* HART devices in a WirelessHART network. Features • Works with All HART Devices. The BULLET is ideal for use with Moore Industries’ HART eld devices and HART I/O, as well as other third-party HART (v.5, 6 and 7) transmitters, valves, distributed I/O and HART 7 compliant WirelessHART Gateways. • Save Time and Money. Use our TCM Temperature Concentrator Module to monitor up to 16 HART digital signals. The TCM accepts RTD, T/C, mV, ohms and potentiometer inputs. • Industry-rst, Patented StepVolt™ Technology. Sets insertion voltage in steps from 1 to 2.5 volts to optimize the tradeoff between available loop power and wireless communication bandwidth. • “Plug-and Play” Installation and Operation. Sets up using a standard HART DD/EDD, or using free DTM (Device Type Manager) device-specic software designed to operate within a frame program such as PACTware™. The BULLET can also be factorycongured by Moore Industries personnel to user specications. • Installs in Rugged Field and Hazardous Areas. Featuring a rugged internal antenna design, the BULLET is available in General Purpose, IntrinsicallySafe, Non-Incendive, Non-Sparking and Explosionproof/Flameproof models. Page 1

WirelessHART® Adapter for Use with Wired HART® Field Devices Single-Device WirelessHART Networks The BULLET WirelessHART Adapter can be used to send process signals from a smart HART eld transmitter or valve, or from a non-smart analog (4-20mA) transmitter. This includes primary, secondary, third and fourth variables from smart HART transmitters, and valve position, travel and valve output pressure from smart HART valves. It also includes diagnostic and alarm data, and custom commands from both smart transmitters and valves. Devices may include Moore Industries’ THZ2/TDZ2 Smart HART...

WirelessHART® Adapter for Use with Wired HART® Field Devices Supports WirelessHART Mesh Topology Mesh networks using BULLET Adapters and any other combination of WirelessHART devices deliver highlyreliable, self-healing, redundant-path wireless networks. The BULLET can also be used as a repeater when longer transmission distances are required or physical barriers prohibit “Line-of-Sight” installation. Host Control System WirelessHART Gateway Smart HART Temperature, Pressure, Level and Flow Transmitters (Up to 8 Multidropped) BULLET WirelessHART Adapter Ready-to-Install Moore Industries...

WirelessHART® Adapter for Use with Wired HART® Field Devices Economical Field-Mount Multi-Device WirelessHART Applications Using Moore Industries TCS Smart HART Temperature Concentrator System™ To further save device costs, Moore Industries’ TCS Multi-Channel Smart HART Temperature Transmitter prepackaged in our R-BOX Field-Mount Enclosure can be used to send up to 16* temperature measurements, and HART diagnostic and alarm information over one BULLET wireless data link. Host Control System BULLET WirelessHART Adapter TCS Smart HART Temperature Concentrator System Multi-Channel Temperature...

WirelessH ART® Adapter for Use with Wired HART® Field Devices Ordering Information

WirelessHART® Adapter for Use with Wired HART® Field Devices Certications (see the “Ordering Information” table for applicable models) Factory Mutual (US/Canada): Intrinsically-Safe Class I, II & III, Division 1, Groups A-G Class 1 Zone 0 II 1 G AEx ia IIC; Zone 20 II 1 D AEx iaD IP68 T95°C; Non-Incendive Class I, Division 2, Groups A-D, T5, T6 Suitable for use in Class II & III, Division 2, Groups E-G, T5, T6 Class I, Zone 2 II 3 G AEx nA nC IIC T5, T6 Explosion-Proof & Dust Ignition-Proof Class I, Division 1, Groups A-G Class II & III, Division 1, Groups E-G Flameproof Class 1 Zone 1 II 2...