Catalogs >
MOOG >
TACTICAL FIBER OPTIC MODEMS

TACTICAL FIBER OPTIC MODEMS
6Pages

Catalog excerpts

TACTICAL FIBER OPTIC MODEMS U.S. Army and ANSI Standards This data sheet contains controlled technical data that has been cleared for public release by the U.S. Government under ITAR Exemption 22CFR 125.4(b)(13).

Open the catalog to page 1

Overview The family of Fiber Optic Modems (FOMs) provide electrical to optical conversion of electronic communication and data signals for transmission using tactical fiber optic cable assemblies. The FOMs simultaneously receive incoming optical signals and converts them back to the original electronic signal allowing for full duplex transmission. Together with the tactical fiber optic cables, the FOMs provide a rugged, secure and easily deployable optical link. The FOM is available in both single channel and multi-channel conﬁgurations and can be mounted on the signal entry panel (SEP) of...

Open the catalog to page 2

Single channel FOMs The single channel FOM is currently available in four standards based communications interfaces: Standard NRZ, Conditioned Diphase, DS3, and IP (Internet Protocol). These modems transmit up to 16 km without a repeater using multimode ﬁber and use less than 5 watts of power. The single channel FOMs are designed to mount on the Signal Entry Panel (SEP) of the tactical communication shelters or they can be installed in a rack mount panel. FOMs are available with various tactical ﬁber optic connectors, including TFOCA, *TFOCA-II™ and Expanded Beam. General Speciﬁcations • •...

Open the catalog to page 3

Integrated 10/100Mb and MD1272/G (Single Channel FOM) The FOM-IP/1 integrates the MD1272/G and IP/1 10/100 Mbps ﬁber optic modems that provide a ruggedized optical link between mobile shelter equipment and remote sites for tactical communications. This unit provides electrical to optical conversion of IP (Internet Protocol) data and electro-optical conversion for full duplex transmission of digital communications signals between tactical shelters using multimode tactical ﬁber optic cable assemblies and is designed for use in harsh environments. The interface at each end of the multimode...

Open the catalog to page 4

DualFOM / DualFOM-II DualFOM and DualFOM-II are ideal solutions for up grading to fiber optic communications without the need for expensive upgrading of shelter equipment. The DualFOM and DualFOM-II are rugged, fieldexposed units that facilitate replacement of CX-11230 coaxial cable assemblies with long distance Tactical Fiber Optic Cable Assemblies (TFOCAs). They are designed to carry all standard conditioned diphase group rates from 72 kbps through 4.608 Mbps in the tactical communications environment without shelter or equipment modiﬁcation. Both versions connect to standard CX-11230...

Open the catalog to page 5

Multimode and Singlemode Tactical Fiber Optic Cable Assembly (TFOCA) Overview The Tactical Fiber Optic Cable Assembly (TFOCA) provides the physical connection between Fiber Optic Modems (FOMs), repeaters or other equipment capable of electronic to optical conversion. The TFOCA is a ruggedized, lightweight and tactically superior ﬁber optic cable that replaces existing CX-11230 coaxial cable. The TFOCA was speciﬁcally designed for quick and easy deployment in rugged, h a r s h e n v i r o n m e n t s . I t w a s e n g i n e e r e d t o satisfy the stringent environmental and mechanical...

Open the catalog to page 6