Catalogs >
MOOG >
FLOW CONTROL SERVOVALVES J869 SERIES

FLOW CONTROL SERVOVALVES J869 SERIES
1 / 8Pages

Catalog excerpts

FLOW CONTROL SERVOVALVES J869 SERIES - 1

FLOW CONTROL SERVOVALVES J869 SERIES TWO STAGE SERVOVALVES FOR INDUSTRIAL APPLICATIONS What moves your world

FLOW CONTROL SERVOVALVES J869 SERIES - 2

J869 Series flow control servovalves are throttle valves for 3 and preferably 4 way applications. They are a high ‐ ‐ performance, two-stage design that covers the range of rated flows from 3.2 to 64 Lmin at 7.0 MPa valve drop. The output stage is a closed center, four-way, sliding spool. The pilot stage is a symmetrical double-nozzle and flapper, driven by a double air gap, dry torque motor. Mechanical feedback of the spool position is provided by a cantilever spring. The valve design is simple and rugged for dependable, long life operation. These valves are suitable for Industrial Robots,...

Open the catalog to page 2

FLOW CONTROL SERVOVALVES J869 SERIES - 3

An electrical command signal is applied to the torque motor coils and creates a magnetic force, which acts on the ends of the pilot stage armature. This causes a deflection of armature flapper assembly within the flexure tube. Deflection of the flapper restricts fluid flow through one nozzle, which is carried through to one spool end, displacing the spool. to Movement of the spool opens the supply pressure port P one control port while simultaneously opening the tank port T to the other control port. The spool motion also applies a force to the cantilever spring, creating a restoring torque...

Open the catalog to page 3

FLOW CONTROL SERVOVALVES J869 SERIES - 4

GENERAL TECHNICAL DATA General Technical Data Proof Pressure Temperature Range Fluid Ambient Seal Material NBR Other seal material upon request Operating Fluid Compatible with common hydraulic fluids, other fluids on request. Recommended Viscosity System Filtration High pressure filter without bypass, but with dirt alarm mounted in the main flow and if possible, directly upstream of the valve. Refer to Moog filtration catalog for recommended filtration scheme. Class of Cleanliness The cleanliness of the hydraulic fluid greatly effects the and performance spool positioning, high resolution...

Open the catalog to page 4

FLOW CONTROL SERVOVALVES J869 SERIES - 5

TECHNICAL DATA Technical Data Test Condition

Open the catalog to page 5

FLOW CONTROL SERVOVALVES J869 SERIES - 6

INSTALLATION DRAWING Installation Drawing Connector Mate with MS3106x 14S 2S Null Adjust Fixed Return Port T 10 MAX. O Ring AS568 015 Name Plate Pressure Port P 3 8 O Ring AS568 013

Open the catalog to page 6

FLOW CONTROL SERVOVALVES J869 SERIES - 7

ELECTRICAL CONNECTIONS, ORDERING INFORMATION, SPARE PARTS AND ACCESSORIES Electrical Connections Rated current and coil resistance A variety of coils are available for J869 Series Servovalves. Coil connections A four-pin electrical box connector that mates with an MS31 06A‐ ‐ cable connector standard. All four torque motor 14S 2S is leads are available at the connector so external connection can be made for series, parallel or single coil operation. The servoamplifier responds to input current, so a servoamplifier that has high internal impedance as obtained with current feedshould be used....

Open the catalog to page 7

FLOW CONTROL SERVOVALVES J869 SERIES - 8

For more specific information For more specific information regarding Moog products, solutions or services, please Email us, or visit our website. You may also directly contact your local Moog office. www.moog.co.jp Moog is a registered trademark of Moog Inc. All trademarks as included herein are the property of Moog Inc. and its subsidiaries. ©2012 Moog Inc. All rights reserverd. WHAT MOVES YOUR WORLD

Open the catalog to page 8