Catalog excerpts

FLOW CONTROL PROPORTIONAL VALVES J866 SERIES TWO STAGE PROPORTIONAL VALVES FOR INDUSTRIAL APPLICATIONS What moves your world
Open the catalog to page 1
J866 Series flow control proportional valves are throttle valves for 3- and preferably 4-way applications. They are a high performance, two-stage design that covers the range of rated flows from 10 to 80 L/min at 7.0 MPa valve drop. The output stage is a closed center, four-way, sliding spool. The pilot stage is a symmetrical double-nozzle and flapper, driven by a double air gap, dry torque motor. The spool position is proportional to the coil current. The valve design is simple and rugged for dependable, long life operation. These valves are suitable for Press Machines and other...
Open the catalog to page 2
An electrical command signal is applied to the torque motor coils and creates a magnetic force, which acts on the ends of the pilot stage armature. This causes a deflection of armature flapper assembly within the flexure tube. Deflection of the flapper restricts fluid flow through one nozzle, which is carried through to one spool end, displacing the spool. to Movement of the spool opens the supply pressure port P one control port while simultaneously opening the tank port T to the other control port. The spool motion also applies a force to the coil spring. Once the coil spring force...
Open the catalog to page 3
GENERAL TECHNICAL DATA General Technical Data Proof Pressure Temperature Range Fluid Ambient Seal Material NBR Other seal material upon request Operating Fluid Recommended Viscosity Compatible with common hydraulic fluids, other fluids on request. System Filtration High pressure filter without bypass, but with dirt alarm mounted in the main flow and if possible, directly upstream of the valve. Refer to Moog filtration catalog for recommended filtration scheme. Class of Cleanliness The cleanliness of the hydraulic fluid greatly effects the and performance spool positioning, high resolution...
Open the catalog to page 4
TECHNICAL DATA Technical Data Specification Rated Supply Pressure Operating Pressure Range Proof Pressure Supply Proof Pressure Return Rated Current Series connection Nominal Coil Resistance Supply Pressure 30 % of Rated Pressure Null Bias Null Shift Hysteresis Frequency Response Temperature Range Petoroleum base hydraulic fluid Viscosity Range of Operating Fluid Connector Direction Petoroleum base hydraulic fluid Change in Control Flow with Current and Load Pressure 100% Control Flow No-Load Flow Gain Characteristic Input Current Input Current Load Pressure Drop
Open the catalog to page 5
INSTALLATION DRAWING Installation Drawing Name Plate ElectricalConnector Mate with MS3106x 14S 2S Null Adjuster Pressure Port P 10 O Rings 5* AS568 014 Note : The mounting manifold must conform to DIN 24340 A 10 Coil Connection Surface Roughness 1.6a Flatness 0.01
Open the catalog to page 6
ELECTRICAL CONNECTIONS, ORDERING INFORMATION, SPARE PARTS AND ACCESSORIES Electrical Connections Rated current and coil resistance Only one type is available for J866 Series Proportional valves. Coil connections A four-pin electrical box connector that mates with an MS31 06A‐ ‐ cable connector standard. All four torque motor 14S 2S is leads are available at the connector so external connection can be made for series, parallel or single coil operation. The servoamplifier responds to input current, so a servoamplifier that has high internal impedance as obtained with current feedshould be...
Open the catalog to page 7
For more specific information For more specific information regarding Moog products, solutions or services, please Email us, or visit our website. You may also directly contact your local Moog office. www.moog.co.jp Moog is a registered trademark of Moog Inc. All trademarks as included herein are the property of Moog Inc. and its subsidiaries. ©2012 Moog Inc. All rights reserverd. WHAT MOVES YOUR WORLD
Open the catalog to page 8All MOOG catalogs and technical brochures
-
SINGLE AXIS DRIVE DS2020
16 Pages
-
HYDRAULIC TEST ACTUATOR
14 Pages
-
MACHINE CONTROLLER MC 600 SERIES
28 Pages
-
TURRET TEST SYSTEMS
2 Pages
-
MOTION TECHNOLOGY
92 Pages
-
ELECTROHYDROSTATIC PUMP UNIT
52 Pages
-
High Performance Solenoids
4 Pages
-
Actively Operated (CHE, RHE)
24 Pages
-
Spool Type (CKE, DMO)
12 Pages
-
Space Sector Brochure
7 Pages
-
Data Acquisition Unit
2 Pages
-
Motion Controllers
68 Pages
-
Hydraulic Service Manifold
8 Pages
-
Electrohydrostatic Pump Unit
28 Pages
-
TACTICAL FIBER OPTIC MODEMS
6 Pages
-
CONTROL LOADING SOLUTIONS
5 Pages
-
SERVODRIVE DS2110
16 Pages
-
A085 series
2 Pages
-
RADIAL PISTON PUMP
80 Pages
-
RKP-D RADIAL PISTON PUMP
31 Pages
-
EFB & DCV/ACV Training
1 Pages
-
Moog Pitch Control Training
15 Pages
-
Rotor Monitoring Systems
2 Pages
-
Blade Sensing Systems
2 Pages
-
Wind Turbine Pitch Valve
2 Pages
-
Dynamic Energy Unit
2 Pages
-
HYDRAULIC SIMULATION TABLE
12 Pages
-
HYDRAULIC PITCH PUMP
2 Pages
-
MAXFORCE SIZE 6
19 Pages
-
MAXFORCE SIZE 5
18 Pages
-
MAXFORCE SIZE 4
18 Pages
-
MAXFORCE SIZE 3
18 Pages
-
Axis Control Valve
2 Pages
-
MSD Servo Drive Compact
2 Pages
-
Gas and Steam Turbines
2 Pages
-
Ruggedized Motion Controller
2 Pages
Archived catalogs
-
FASTACT T/F AC Servomotors
24 Pages