Catalogs >
MOOG >
Actively Operated (CHE, RHE)

Actively Operated (CHE, RHE)
24Pages

Catalog excerpts

2-wAy Slip-in VAlVeS active cartridge iSo 7368 SizeS 16 to 100 WHAT MOVES YOUR WORLD

General Description Features and Types of Cones and Sleeves Specifications and Characteristic Parameters Performance Data X-Cone, S-Cone,T-Cone Typical Orifice Characteristics Hydraulically Operated, Solenoid Operated Ordering Information Spare Parts This catalogue is for users with technical knowledge. To ensure that all necessary characteristics for function and safety of the system are given, the user has to check the suitability of the products described herein. In case of doubt please contact Moog.

Open the catalog to page 3

Moog Active Cartridge valve was designed to eliminate many of the limitations of Standard Cartridge Valves. The Active Cartridge contains an additional control area that provides more robust control of switching pressure for high speed and response machines where low system pressure can delay closing times. In essence,Active Cartridges have a double acting pilot piston for 4-way directional control of the cone or poppet, whereas a Standard Cartridge uses a single acting piston for 3-way control. As a result, the Active Cartridge can offer improvements in: ^ Closing time ^ Opening time ^...

Open the catalog to page 4

Features ➢ All pilot and poppet seals create tight fit at all ports to prevent leakage in either direction ➢ Opening function and velocity of the cartridge are independent of the pressure in the working ports A and B ➢ Can operate without a spring when a defined spool position is not required and hydraulic system pressure is down ➢ Ability to be equipped with X-, S-,T-, and special cones ➢ Cartridge can be closed by a considerably lower control pressure at X due to the larger control surface area AX (compared to the surface area AA) Types of Cones and Sleeves Sleeve A, Cone X: An...

Open the catalog to page 5

Measuring conditions: activ opended, Oil viscosity 35 mm2/s, oil temperature 50° C.

Open the catalog to page 7

Performance Data ∆p-Q-Diagrams CONE-S ∆p [bar] Measuring conditions: activ opended, Oil viscosity 35 mm 2/s, oil temperature 50

Open the catalog to page 8

Performance Data ∆p-Q-Diagrams CONE-T ∆p [bar] Measuring conditions: activ opended, Oil viscosity 35 mm 2/s, oil temperature 50

Open the catalog to page 9

Standard Models X-Cone for Directional Control Part Designation Part Number

Open the catalog to page 10

Standard Models S-Cone for Directional Control Size Symbol Part Designation Part Number

Open the catalog to page 11

Standard Models T -Cone for Directional Control Part Designation Part Number

Open the catalog to page 12

Standard Models Covers Part Designation Part Number Normally Open or Normally Closed

Open the catalog to page 13

Typical Orifice Characteristics The function and switching velocity of a cartridge-valve can be influenced by changes in the metering-in and metering-out flow through the pilot lines.This could be realized by changing mounting orifices as required. The following diagram should be used for selecting the correct orifice diameter. Pressure Difference

Open the catalog to page 14

Hydraulically Operated Valves Note: Fastening screws are not part of the delivery.

Open the catalog to page 15

*la = Mounted side of pilot valve Note: Fastening screws are not part of the delivery.

Open the catalog to page 16

Dimensions inSTALLATiOn DiMEnSiOnS in Accordance with iSO 7386:1989-08 Seat depth Seat depth Cartridge Cavity Required surface ﬁnish of the mating surface recommendation deviates from the standard Bolt and port pattern m1 =

Open the catalog to page 17

1) Recommendation deviates from the standard

Open the catalog to page 18

Ordering Information Active Cartridge (w/o cover) NBR Seals Type of Cone (see page 5) X Step Poppet Step Poppet Step Poppet with Dampening Nose Active Cartridge Manifold Mounting Nominal Bore Size (mm) 16 ISO 7368-BA-06-2-A 25 ISO 7368-BB-08-2-A Opening Pressure Serial Number

Open the catalog to page 19

Ordering Information Active Cartridge Covers Type of Cover Function Cover with normally open/closed configuration Cover with external hydraulic pilot (no pilot pattern) Cartridge Cover Pilot Valve Pattern X06 Cover with Cetop D03, ISO 4401-03-02-0-94 pattern up to NG40 Cover with Cetop D05, ISO 4401-05-04-0-94 from NG50 and above Manifold Mounting Nominal Bore Size (mm) 16 ISO 7368-BA-06-2-A Indication in 10 th of a mm of the diameter and in the same order as given in the function symbol (P, A, B,T, X,Y) ..00 = Plug ..08 = Orifice 0,8 mm ..15 = Orifice 1,5 mm i.e. : X08 = Orifice 0,8 mm in...

Open the catalog to page 20

(Normally Closed - Energize solenoid to open) (Normally Open - Energize solenoid to close) (externally hydraulically operated)

Open the catalog to page 21

Order examples: O-Ring Item 5 for NG25 Order number: X980-02116 Spring 2,0 bar Item 10 for NG25 Order number: XEF10014

Open the catalog to page 22

Moog designs a range of motion control products that complement the performance of those featured in this catalog. Visit our website for more information and contact the Moog facility nearest you. moog is a registered trademark of moog Inc. and its subsidiaries. Ah trademarks as indicated herein are the property of moog inc. and its subsidiaries. ©2014 moog inc. Ah rights reserved. Ah changes are reserved. Active Cartridge CHE x999-02003 WHAT MOVES YOUR WORLD

Open the catalog to page 24