Catalogs >
MOOG >
2-WAY SLIP-IN CARTRIDGE VALVES MONITORED CSE series

2-WAY SLIP-IN CARTRIDGE VALVES MONITORED CSE series
24Pages

Catalog excerpts

2-WAY SLIP-IN CARTRIDGE VALVES MONITORED CSE series - 1

2-WAY SLIP-IN CARTRIDGE VALVES MONITORED FLOW-OPTIMIZED DESIGN FOR UP TO 420 BAR (6,000 PSI) OPERATING PRESSURE AND MAXIMUM ENERGY EFFICIENCY MOTION CONTROLLER What moves your world

Open the catalog to page 1

2-WAY SLIP-IN CARTRIDGE VALVES MONITORED CSE series - 2

Moog 2-Way Cartridge Valve Type CSE Whenever the highest levels of motion control performance and design flexibility are required, you’ll find Moog expertise at work. Through collaboration, creativity and world-class technological solutions, we help you overcome your toughest engineering obstacles. Enhance your machine‘s performance, and help take your thinking further than you ever thought possible. This catalog is for users with technical knowledge. To ensure the functionality and safety of the system, the user should check the suitability of the products described herein. The products...

Open the catalog to page 2

2-WAY SLIP-IN CARTRIDGE VALVES MONITORED CSE series - 3

Moog 2-Way Cartridge Valve Type CSE PRODUCT OVERVIEW Mode of Operation/ Scope The CSE 2-Way Slip-in Cartridge Valves have two working ports (A and B) and one or more pilot port connections. Flow direction through the valve can be from A to B, or from B to A, depending on the valve function desired. Both check and directional functions are possible. A seated poppet design ensures that the connection between the A and B ports is sealed off leakage free when closed. A poppet shaft seal ensures that the C port is also sealed off leakage free from the B port. These 2-Way Slip-in Cartridge Valves...

Open the catalog to page 3

2-WAY SLIP-IN CARTRIDGE VALVES MONITORED CSE series - 4

TECHNICAL DATA Moog 2-Way Cartridge Valve Type CSE 1) NBR: Nitrile Rubber (Buna-N) 2) FKM: Fluorocarbon Rubber

Open the catalog to page 4

2-WAY SLIP-IN CARTRIDGE VALVES MONITORED CSE series - 5

Moog 2-Way Cartridge Valve Type CSE HYDRAULIC SYMBOLS AND CONTROL SURFACES 1D - Function Sizes 16 - 63

Open the catalog to page 5

2-WAY SLIP-IN CARTRIDGE VALVES MONITORED CSE series - 6

Technical Data Moog 2-Way Cartridge Valve Type CSE Performance Curves Note: - All performance curves are measured without using a cartridge spring (valve fully open) - A B und B A indicate the respective flow direction - The vertical line labelled Qv= 30m/s indicates that a fluid velocity of 30m/s exists in the A-port of the ISO 7368 cavity. This value should not be exceeded in order to avoid cavitation damage to the cartridge and manifold.

Open the catalog to page 6

2-WAY SLIP-IN CARTRIDGE VALVES MONITORED CSE series - 7

TECHNICAL DATA Moog 2-Way Cartridge Valve Type CSE Note: - All performance curves are measured without using a cartridge spring (valve fully open) - A OB und B OA indicate the respective flow direction - The vertical line labelled Qv= 30m/s indicates that a fluid velocity of 30m/s exists in the A-port of the ISO 7368 cavity. This value should not be exceeded when using these valves. The maximum leakage at the switching point for a fluid with a density of 860 kg/m3, a pressure difference of 100 bar (Ap = | pA - pB|) across the valve and a kinematic fluid viscosity of 46 cSt [mm2/s] can be...

Open the catalog to page 7

2-WAY SLIP-IN CARTRIDGE VALVES MONITORED CSE series - 8

Technical Data Moog 2-Way Cartridge Valve Type CSE Orifice Configurations An orifice configuration should be chosen to ensure that, in general terms, a) the poppet velocity does not exceed 0.3 m/s, and b) that the flow capacity of the pilot valve is not exceeded. The following flow assumptions have been made: Size 6 pilot valve: Qmax = 20 l/min (CSE Sizes 16-50) Size 10 pilot valve: Qmax = 70 l/min (CSE Size 63) 1D Function Example: Both A and B ports have the same pressure, C is vented to tank and the valve opens. For a size 40 valve and a working pressure of 210 bar this would result in a...

Open the catalog to page 8

2-WAY SLIP-IN CARTRIDGE VALVES MONITORED CSE series - 9

Technical Data Moog 2-Way Cartridge Valve Type CSE Orifice Configurations RM and 5W Functions Example: Both A and B ports have the same pressure, C is vented to tank and the valve opens. For a size 25 valve and a working pressure of 210 bar this would result in a 1,6 mm orifice each for P, A & T. In this case, B must be plugged as well. Note: plugs are not leakage-free. Note: Examples are for reference only. Should the pressures in the working ports A and B and/or the flow capacities of the pilot valves be different from what is described here, then it will be necessary to calculate the...

Open the catalog to page 9

2-WAY SLIP-IN CARTRIDGE VALVES MONITORED CSE series - 10

Moog 2-Way Cartridge Valve Type CSE VALVE DIMENSIONS - SIZES 16 - 50 NG (cover type) Note: Dimensions in mm (in) 1) Only for 5W cover

Open the catalog to page 10

2-WAY SLIP-IN CARTRIDGE VALVES MONITORED CSE series - 11

TECHNICAL DATA Moog 2-Way Cartridge Valve Type CSE Note: Dimensions in mm (in) 1) Only for 5W cover

Open the catalog to page 11

2-WAY SLIP-IN CARTRIDGE VALVES MONITORED CSE series - 12

Moog 2-Way Cartridge Valve Type CSE Fitting length Fitting length Required surface ﬁnish of the mating surface Rmax4 1) Recommended value deviates from the ISO standard. 2) Moog recommends the following for operating pressures higher than 350 bar: -Radius of R2 mm for sizes 16 - 32 -Radius of R4 mm for sizes 40 - 63. Bolt and Port Pattern Sizes 16 – 63

Open the catalog to page 12

2-WAY SLIP-IN CARTRIDGE VALVES MONITORED CSE series - 13

Moog 2-Way Cartridge Valve Type CSE Note: Dimensions in mm (in) 1) Recommendation deviates from Standard

Open the catalog to page 13

2-WAY SLIP-IN CARTRIDGE VALVES MONITORED CSE series - 14

Moog 2-Way Cartridge Valve Type CSE 1: +24 V 2: Low signal when the valve is in the closed position. 3: 0 V 4: High signal when the valve is in the closed position. • The limit switch has no PE connection. • The connecting plug (M12) is not included in delivery (but can be ordered separately - see page 16). *EMV rating is only ensured through the use of insulated cables and plug shielding

Open the catalog to page 14

2-WAY SLIP-IN CARTRIDGE VALVES MONITORED CSE series - 15

ORDERING INFORMATION Moog 2-Way Cartridge Valve Type CSE BASIC CONFIGURATIONS AND SEAL KITS Basic Configurations11 (NBR Seals) 1) Orifices can be ordered separately (see page 16)

Open the catalog to page 15

2-WAY SLIP-IN CARTRIDGE VALVES MONITORED CSE series - 16

Moog 2-Way Cartridge Valve Type CSE ACCESSORIES Pilot Valves Mounting Screws Right Angle Connector - M12 with Cable

Open the catalog to page 16

2-WAY SLIP-IN CARTRIDGE VALVES MONITORED CSE series - 17

ORDERING INFORMATION Moog 2-Way Cartridge Valve Type CSE TYPE EXAMINATION CERTIFICATE certificate Translation in ar,y case-German original snail prevail DGUV Test Certificate Name and address of the MOOG Luxembourg S.a.r.l Product designation Test report Further details: DGUV Test Pruf- und Zertifizierungsstelle 421, Zone d activites Economiques Wolser F Cartridge valve in compliance with ISO 7368 Y: spring-type, X: control oil ports, O: without pilot valve GS-HM-23: Injection moulding machines , 2023-01 DIN EN ISO 20430 Plastics and rubber machines - Injection moulding machines - Safety...

Open the catalog to page 17

2-WAY SLIP-IN CARTRIDGE VALVES MONITORED CSE series - 18

ORDERING INFORMATION Moog 2-Way Cartridge Valve Type CSE TYPE EXAMINATION CERTIFICATE Zertifikat DGUVTest Prut- und Zertmzierungsstelle Fachbereich Holz und Metall DGUV Test Zert kat Name und Anschrift des MOOG Luxembourg S.a.r.l 421, Zone d activites Economiques Wolser F Y: Federtyp, X: Steuerolanschlusse, O: Ohne Vorsteuerventil SpritzgieLsmaschinen - Sicherheitsanforderungen Zugehoriger Prutbericht Weitere Angaben BestimmungsgemaLse Verwendung: Zur Verwendung fur hydraulische SchlieBsicherungen in Spritzgiefimaschinen gemaB Bemerkungen: Dasjeweilige Ventil istgemafi Kapitel 4 der DIN EN...

Open the catalog to page 18