Technical Drawing and Mechanical Specifications

The document includes detailed mechanical dimensions and tolerances for a component, featuring front and side views. Key dimensions include a 2.25 inch (57.2 mm) height and width, a 5.05 inch (128.3 mm) length, and hole diameters of 0.21 inch (5.2 mm) through holes arranged on a 2.625 inch (66.68 mm) bolt circle, equally spaced. Critical tolerances are specified, such as a diameter of 0.2498 inch ±0.0002 and 1.497 inch ±0.002 (38.02 mm ±0.05).

Performance Curves and Parameters

The document presents torque and power performance graphs plotted against rotational speed (kRPM). The torque is measured in oz-in (N·m), and power in Watts. The curves distinguish between continuous and peak torque and power values. Peak torque reaches approximately 130 oz-in (0.918 N·m), with continuous torque and power values lower, indicating operational limits for safe and sustained use.

Key Specifications and Parameters

• Mechanical dimensions with precise tolerances for mounting and assembly.
• Four mounting holes with specified diameter and bolt circle spacing.
• Performance data showing torque and power capabilities across speed ranges up to 6 kRPM.
• Clear differentiation between continuous and peak operational limits to guide usage.

Recommendations and Best Practices

Users should adhere strictly to the specified mechanical tolerances to ensure proper fit and function. Operational parameters should not exceed continuous torque and power limits to avoid damage or reduced lifespan. Peak values indicate maximum short-term capabilities and should be used cautiously.