Mechanical Specifications

The document includes detailed mechanical dimensions of a component, featuring front and side views. Key measurements include a radius of 20 units (5.0 mm), overall dimensions of 2.25 inches (57.2 mm) in height and width, and a thickness of 0.81 inches (20.6 mm). There are four through holes with a diameter of 0.21 inches (5.2 mm) equally spaced on a bolt circle diameter of 2.625 inches (66.68 mm). Additional critical diameters are specified as 0.2498 inches ±0.0002 (6.345 mm ±0.005) and 1.497 inches ±0.002 (38.02 mm ±0.05).

Torque and Power Performance Curves

The document presents torque and power performance data plotted against rotational speed (kRPM). The key parameters include:

• Peak Torque and Continuous Torque values, measured in oz-in (N·m).
• Peak Power and Continuous Power values, measured in Watts.
• Torque ranges from 0 to 225 oz-in (0 to approximately 1.6 N·m).
• Power output ranges up to 85 Watts (0.600 Watts in some units, likely a formatting issue).
• Speed range extends from 0 to 9 kRPM.

The curves illustrate the relationship between torque and power across the speed range, highlighting peak and continuous operating limits.

General Observations and Recommendations

The document appears to be a technical datasheet or specification sheet for a mechanical or electromechanical component, possibly a motor or actuator, given the torque and power data. The precise mechanical dimensions and tolerances indicate critical fit and assembly requirements. The performance curves provide essential information for selecting operating points within safe continuous and peak limits.

Critical Points:

• Maintain dimensional tolerances to ensure proper assembly and function.
• Operate within continuous torque and power limits to avoid damage.
• Use peak torque and power values only for short durations.

Due to partial illegibility and formatting issues in the source, some numeric values may require verification against original data.