RS485-ISO The RS485-ISO adapter provides electrically isolated conversion from RS-232 on the main 7W2 connector to RS-485. The adapter comes standard with a 10 Foot power cable and two parallel 4 pin Molex RS-485 connectors. RS485 provides improved noise immunity over cable lengths of up to 1,000 ft (305m). It also allows you to operate a network of up to 100 SmartMotors in parallel, rather than daisy-chaining the communications from one motor to the next. The adapter draws power and ground from the SmartMotor main connector (pins 2 and 5). It does require the use of the main connector G-Synch line (pin 1) for Read-Write control of the 485 transceiver. The RS485-ISO communications adapter can be ordered with or without the power cable (no cable P/N: RS485ISO-NOCBL). BRAKE OPTIONS FIELDBUS OPTIONS MOTOR SPECIFICATIONS Power and Communications Cables GEAR HEADS POWER SUPPLIES & SHUNTS Main Servo Power Connector Animatics Corporation • All integrated motor products made by Animatics are covered by patent number 5,912,541 tel: 408.748.8721 • fax: 408.748.8725 • www.animatics.com