Open Frame Shunts • Can be used with Power supplies that have an output of 48VDC or less • Automatic Gate-On when Voltage Exceeds 49.5VDC • Easy direct parallel connection to power supply RED WIRE - +DC VOLTAGE INPUT 5 CONNECTIONS: RED WIRE +DC VOLTAGE INPUT BLACK WIRE —DC VOLTAGE INPUT 7 USE PROPER ELECTRICAL SAFETY PRECAUTIONS. B ALL DIMENSIONS ARE NOMINAL, UNLESS OTHERWISE SPECIFIED RED WIRE = +DC VOLTAGE INPUT Any time an E-Stop switch is placed on the DC power line to the motor, a Shunt MUST BE installed between the E-Stop switch and the motor connector to ensure protection against over voltage! Warning ! If the shunt is connected to an adjustable power supply, the output voltage MUST BE set at or below 48VDC. If the output voltage is sustained above the trip point of the shunt, over heating and damage may result. Animatics Corporation • All integrated motor products made by Animatics are covered by patent number 5,912,541