Rotary Drum DIN Abrasion tester

Product catalog summary

Overview: The MonTech ABR 3000 Rotary Drum DIN Abrasion Tester is designed for testing the abrasion resistance of elastomers, such as tires and shoe soles, in compliance with standards DIN 53516, DIN ISO 4649, AS1683.21, and ASTM D 5963. It measures frictional loss by comparing the weight of a specimen before and after testing.

Specifications:

Standards: DIN 53516, ISO/DIN 4649, AS1683.21, ASTM D 5963
Drum Diameter: 150 mm
Drum Speed: 40 rpm
Abrasion Distance: 20 or 40 meters
Specimen Diameter: 16 mm
Specimen Thickness: 6 to 15 mm
Dimensions: 370 mm x 760 mm x 430 mm
Weight: Approximately 50 kg
Electrical: 90-250 V, 1 Amp, 47-63 Hz, Single phase

Test Procedure:

Determine the abrasiveness of the abrasion sheet.
Weigh the test specimen.
Mount the specimen, set the abrasion distance, and apply load weights.
Start the test; the drum rotates and moves the specimen over the abrasive sheet.
After the test, weigh the specimen again to calculate mass loss and abrasion.

Equipment and Accessories:

Stiff aluminum frame with brushless drive system
Specimen holder and abrasion drum
Safety cover and protective switch
Standard accessories include emery papers, adhesive tape, brushes, and a gauge
Optional items: Additional load weights, analytical balance, heated drum, wet testing equipment, drum cleaning unit, circular sample cutter

Key Features:

Quick clamp sample holder for easy specimen mounting
Integrated dead weight of 2.5 N with additional weights available
Optional drum heating for elevated temperature testing

Catalog excerpts

Rubber Testing Solutions Rotary Drum DIN Abrasion tester INNOVATIONS IN RUBBER TESTING

Open the catalog to page 1

MonTech ABR 3000 Rotary Drum DIN Abrasion tester Abrasion Tester ABR 3000 The MonTech rotary drum abrasion tester in accordance with DIN 53516, DIN ISO 4649, AS1683.21 and ASTM D 5963 makes abrasion testing really easy. The test specimen is fixed into a quick clamp sample holder and precisely guided - either with or without rotation - over a predefined distance of either 20 or 40 Meters and with a defined load on a sheet of abrasive paper mounted to a stainless steel rotary drum of 150 mm diameter. The drum rotates with a speed of 40 rpm. Finally the frictional loss is calculated by comparing...

Open the catalog to page 2

international standards DIN 53516, DIN ISO 4649:2002 (E), AS1683.21, ASTM D 5963 Contact pressure for specimens expandable up to N 2.5 5.0 7.5 10.0 Set of emery papers / abrasion sheets Roll of adhesive tape Safety cover Gauge and blunting sample Standard accessories Peripheral speed of drum with abrasion sheet 0,32 m/s Dimensions of abrasion sheet L/W 472.5 mm (+2) x 400 mm Abrasion distance of specimen 40 m (20 m) Corresponds to roller rotations 84 (42) Angle of inclination of axle center of the specimen to vertical position of the drum 3 degree Granulation of abrasion sheet 60 mesh Maximum...

Open the catalog to page 3

Rubber Testing Solutions Rotary Drum DIN Abrasion tester

Open the catalog to page 4

All MonTech Werkstoffprüfmaschinen GmbH catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list