Monroe PMP 1030 Doris Rd. Auburn Hills, MI 48326 Phone: 800-440-3967 Fax: 800-453-9683 E-Mail: [email protected] Web site: www.monroeengineering.com Push Pull Toggle Clamps These clamps are ideal where space restrictions exist, or a straight line action is preferred hardened and ground plungers provide superior wear extending the life of the clamp Օ Ergonomic, vinyl, handle design is not only comfortable but also impervious to oils and lubricants, with no "staining" effect Nose mounted flange (included where noted) allows clamp to be mounted at any angle by simply tightening the lock nut Օ Base and linkage are made of high quality, close tolerance, die stamped steel parts are cleaned and deburred with a zinc plated finish All clamps provided with threaded plunger clamping bolt. Results 1 - 6 of 6 Item # MA-302-FM A - Body Width Holding Force Reference F - Open Handle Height 78.00 mm N - Hole Depth Image 56.00 mm 300 Ib 605M N/A ma-302-fm MA-36003-M 47.60 mm 600 lb 603M 82.00 mm 31.76 mm ma-36003-m MA-36202 24.00 mm 200 lb 602 75.91 mm 20.55 mm ma-36202 MA-36204 28.20 mm 300 lb 604 98.00 mm 38.95 mm ma-36204 MA-36330 57.00 mm 2500 lb 630 N/A N/A ma-36330 8/3/2011 | Page 1 of 2