1. Catalogs
  2. Monroe Engineering
  3. Portable Neo Lift Magnets

Portable Neo Lift Magnets

Portable Neo Lift Magnets

Product catalog summary
Overview: The document provides details on Monroe PMP's Portable Neo Lift Magnets, which are permanent lift magnets designed for handling steel plates, die castings, and forgings. These magnets eliminate the need for clamping devices, slings, or chains, allowing operations to be performed by a single person.
Specifications: The Neo lift magnets are compact yet powerful, suitable for use on flat or round surfaces. They feature an internal release device that does not damage the surface of the lifted part. The magnets are lightweight due to their Rare Earth design and have nickel-plated pole shoes for hardness and rust resistance. Holding values are stated at 33% of the actual value.
Safety and Usage Recommendations: Users are advised never to stand under a load being lifted and to use extra caution. Magnetic lifts should only be used on materials that do not flex or bend, and both the lift and load surfaces must be clean and free of debris. The lift must be centered on the load and is not recommended for painted or finish-coated surfaces.
Product Range: The document lists seven models of Neo lift magnets, each with specific dimensions, weight, and holding values for flat and round items. The models range from PML100, with a holding value of 220 lb for flat items, to PML6000, with a holding value of 13,200 lb for flat items.
See more

Catalog excerpts

Portable Neo Lift Magnets-1

Portable Neo Lift Magnets m Permanent lift magnets are ideal for handling steel plates, die castings, forgings, etc. They eliminate the need for clamping devices, slings or chains. One person can perform operations previously calling for two or more people when utilizing a permanent magnetic lift. These compact yet powerful Neo lift magnets can be used on flat or round surfaces and contain an internal release devise that does not contact or damage the surface of the part being lifted. Permanent magnetic lifts eliminate the fear of dropping the load being lifted • Lightweight: powerful Rare Earth design for easy handling • Lifts flat or round loads over 1 " thick • Easy manual release does not contact load • Nickel-plated pole shoes provide hardness and rust resistance 'Holding Values are stated at 33% of the actual value. NOTE: Never stand under load being lifted. Always Use EXTRA CAUTION. Only use magnetic lifts on material that does not flex or bend. The surface of the lift and the load need to be clean & free of chips, oil, slag, dirt, etc. Lift must be centered on the load. Not recommended for paint or finish coated surface. Item # Handle Overall Height Overall Width Overall Length Weight Holding Value Holding Value _(Flat Items)_(Round Items)

 Open the catalog to page 1

All Monroe Engineering catalogs and technical brochures

  1. DOWEL PINS

    3  Pages

  2. STUDS

    1  Page

  3. C-WASHERS

    1  Page

  4. LA-2206

    1  Page

  5. BB-35408

    1  Page

  6. BB-35407

    1  Page

  7. BB-35406

    1  Page

  8. BB-35405

    1  Page

  9. BB-35404

    1  Page

  10. Ceramic Disc

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.