Monode Model 450 Programmable Digital Power Unit Electro-Chemical Marking Solution ◊ Easy to Use for Hand Marking ◊ Surface Marking ◊ Operator Lock Out on File Changes ◊ AC or DC Power Output 6-22 Volts ◊ Programmable Etching Parameters ◊ Ready for Semi-Automatic Marking ◊ Monode Technical Support High mark quality, reduced operator errors, and improved stencil life With the new Model 450 power supply. The Monode Model 450 has the pinnacle of production capability in a new family of Monode power supplies. The programmable controller adds features that allow the highest quality etch marking to include those for MIL STD 130 and DOD UID requirements: Ten Program Files: Customers save specific etch parameters in ten convenient files. Often set up by substrate to insure quality marking standards on similar materials. Program changes can be controlled by a key lockout. Control Power and Pulse Settings to Reduce over All Marking Time: Programmable controls take these cycle time sittings away from operator variation – this in turn produces higher quality marks and improves stencil life. Program Files with AC or DC current: This new feature allows standard and deep etch settings. Hand marking has often been specified for deep etch marking on air craft and aerospace parts. Capable of marking safe, legible and most importantly low stress marks. The Model 450 sets a new standard for hand marking. The same built in features allow new controls in conjunction with semi-automatic marking with the Model AM25. Turnkey Solutions can be provided for all your marking needs. Send us complete information and/or parts and prints so we Can put our experience to work for you. We can recommend the Stencil system, electrolytes and provide marking solutions from Standard selection of supplies. Or if needed our engineering Staff can provide a turnkey custom solution to meet your needs. Mentor Ohio USA Visit our web site at www.monode.com or call us at 440 975-8802