W Range
8Pages

The Widethroat W Range The Mono Pedigree Mono have been at the forefront of progressing cavity pump design since 1935. With the experience gained from over 70 years we are able to reflect the varying needs of our extensive customer base worldwide. And an all-round efficiency and quality which our customers demand, and to which we are committed. A long term commitment which is underlined by our attainment, in 2001, of ISO 9001:2000. The W Range has been developed out of this commitment. The design of the W range is such that many different applications can be handled. The standard design...

Performance Data Typical Performance Data for the Widethroat W range CONTACT MONO FOR DUTIES WITHIN THIS AREA NOTES: 1. The tabulated performance data shown is based upon handling clean water at 20oC. 2. For guidance in selection of a pump for use with other fluids of varying abrasion and viscosity refer to Mono Pumps Ltd., Audenshaw, Manchester.

Widethroat W Range Applications A W064 model installed at a sewage treatment works to control sewage odours, caused by a belt press feeding dewatered sludge cake directly onto an open-air conveyor and into an open skip for disposal. The cast iron W064, with an integral bridge breaker fitted as an option, delivers the sludge cake at the required rate of 2.5m3/h and pressures of up to 12 bar. It operates eight hours per day, six days a week and daily fills up the four enclosed skips with sludge cake. Problems arose at a water treatment works with the discharge of sludge cake by chute into a...

A customer, producing mechanically deboned meats, which are frozen before export to food manufacturers worldwide, has installed a stainless steel W062 pump. The meat puree is gravity fed into the inlet hopper for transfer to the freezer plates. The efficiency of the freezing system relies on a constant flow rate of 5 tonnes per hour, to prevent the plates standing idle or a delay further up the line. This site’s sludge dewatering unit, installed at a large sewage treatment works, is a belt thickening system, comprising 3 x 3m wide belt of 0.7mm mesh, located above a collection sump. As the...

W Range Pump Coding FEATURES BODY MATERIALS PUMP DESIGN NOMINAL PUMP CAPACITY AT MAXIMUM SPEED AND ZERO PRESSURE PUMP STAGES PRIME MOVER ARRANGEMENTS AND BUILD SELECTION MECHANICAL SEAL PUMP DESIGN PACKED GLAND PUMP DESIGN DESIGN NUMBER STATOR MAT'L ROTATING PARTS TYPICAL BASIC PUMP CODING PRIME MOVER AND PORT OPTIONS BASIC PUMP CODING STD. VAR. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Cast Iron C Stainless Steel S Widethroat W 1.2m3/h @ 350 rev/min 0 3 5.1m3/h @ 350 rev/min 0 4 10.2m3/h @ 350 rev/min 0 5 17.5m3/h @ 350 rev/min 0 6 28.5m3/h @ 350 rev/min 0 7 34m3/h @ 300 rev/min 0 8 40m3/h @ 250...

NOTES:1. All dimensions in millimetres unless otherwise stated and for guidance only. For full certified drawings refer to Mono Pumps Ltd., Audenshaw, Manchester. 2. Shaft diameters are to BS 4506: 1970 and keyways to ISO R773. 3. End Cover dimensions to BS EN 1092. 4. Dimension Y is the preferred dismantling space. Consult Mono Pumps Ltd. Audenshaw, Manchester for minimum dismantling space. 5. Please refer to Mono Pumps Ltd. Audenshaw, Manchester, for hopper drilling details. 6. V&W - Standard hopper size. For extended hopper sizes, please refer to Mono Pumps Ltd. 7. For models and...

Europe Mono Pumps Ltd, Martin Street, Audenshaw Manchester, M34 5JA, England T. +44 (0)161 339 9000 E. info@mono-pumps.com D.M.I EST, 56, rue du Pont 88300 Rebeuville, France T. +33 (0)3 29 94 26 88 E. dmi-est@dmi-est.fr Americas Monoo Inc., 10529 Fisher Road Houston, Texas 77041, USA T. +1 713 980 8400 E. inquire@monoo.com Monoo S.A., Ing Huergo 2239 (1842) Monte Grande Pcia. de Buenos Aires, Argentina T. +54 11 4290 9940/50 E. info@monoo.com.ar Australasia Mono Pumps (Australia) Pty Ltd Mono House, 338-348 Lower Dandenong Road Mordialloc, Victoria 3195, Australia T. 1800 333 138 E....