One Company, Unlimited Solutions

Construction Derived from a pedigree of over 11,000 installations worldwide our Macerator range incorporates a number of design advances over older machines that give improvements in both maintenance and energy costs. Horizontal Macerator 2 Model Range M12 and M18 Flow on Raw Sewage: M12 up to 5m3/h M18 up to 15m3/h (N.B. For higher flows please refer to our Muncher® range of grinders). Both models available with straight in or 90° inlet chambers. 1. Mechanical Seal Entire seal assembly is oil lubricated and mounted out of contact with liquid being processed. Substantial increase in seal life...

Body and Inlet Chamber Cast in corrosion resistant Grade 220/260. Cast iron BS 1452 (1977). Outlet screwed BSP (female) for direct connection to discharge pipework. Units can operate in vertical or horizontal mounting position. 90° inlets normally fitted when macerator mounted horizontally e.g. in ‘Grifter’ or ‘Compact Mutrator’ layout and have rodding eye for suction pipe clearance duties. Inlet Flange 4. Anti-Swirl Fins Inlet chamber contains 2 large anti-swirl fins to stop ‘spinning’ of textiles and to direct solids in suspension into optimum flow path for maceration through impeller. 5. Cutter...

Retrofitting to Existing Mono Mutrators ® A special adaptor ring is available to enable easy retrofitting of the M18 unit to all existing group 2 (7”) and group 3 (8”) Macerators. The ring simply fits onto the existing inlet canopy without the need to disturb the baseplate or suction pipe. The new Tri-Hammer Macerators offer both an improvement in energy consumption and lower spares prices. The following table shows comparative power consumption of the new models against our earlier units. Power Consumption Tests New M18 design in comparison with: 1. Existing Group 2 macerator 2. Existing Group...

Physical Connectors 2 Model Range M12 and M18 Cutter/Impeller diameters: 125mm/180mm M12 up to 5m3/h M18 up to 15m3/h with pump assistance i.e. Mutrator/Grifter type installation. 80mm Flanged with NP6 drillings. Straight in or 90° bend. 100mm or 150mm Flanged NP16 drilling. Straight in. 125mm Flanged NP16 drilling. 90° bend. Range Selector Mono Macerator G.A. Drawings and Dimensions Sight Glass Units can be mounted vertically or horizontally. Dimensions shown are for guidance and planning purposes only. Please obtain certified drawings before proceeding with detail design work. All dimensions...

Europe Mono Pumps Ltd, Martin Street, Audenshaw Manchester, M34 5JA, England T. +44 (0)161 339 9000 E. [email protected] D.M.I EST, 56, rue du Pont 88300 Rebeuville, France T. +33 (0)3 29 94 26 88 E. [email protected] Americas Monoo Inc., 10529 Fisher Road Houston, Texas 77041, USA T. +1 713 980 8400 E. [email protected] Monoo S.A., Ing Huergo 2239 (1842) Monte Grande Pcia. de Buenos Aires, Argentina T. +54 11 4290 9940/50 E. [email protected] Australasia Mono Pumps (Australia) Pty Ltd Mono House, 338-348 Lower Dandenong Road Mordialloc, Victoria 3195, Australia T. 1800 333 138 E. [email protected]...