EZstrip™ CT201 TR Muncher® “A new addition to the Muncher® family offering a more competitive solution to solids grinding and sludge conditioning”. Typical Applications • Tanker reception • Pump protection • Fat/sludge conditioning A ‘quick release’ access port allows the cutter assembly to be maintained in place without removing the equipment and therefore reduces maintenance time. Rotational speed produces high torque, resulting in lower operating power at 1.5 or 2.2kW, which are available with energy efficient motors. Slow operational speed Lower cutter tip speeds dramatically reduce wear rates. Slow speeds also ensure low noise and vibration, and good abrasion resistance. Available with over-load protection to prevent serious damage to the Muncher®, saving on costly downtime. Tanker reception The off-loading requirements for ‘on-stand’ tankering are matched by the Muncher’s® capacity. Flange connections Standard 150mm with the option of 100mm and Bauer quick release couplings. Pull back cutter stack Allows removal without disturbing pipeline. Built-in trash trap Catches any rejected material, which can then be removed through the access port. Interchangeability of critical spares across the Muncher® range for all machines. Reduced level of stock holding. © Mono Pumps Limited January 2011 T. +44 (0)161 339 9000 E. [email protected] www.mono-pumps.com