ATEX and IECEx Group II certified. Submersible, general purpose, top‐entry velocity transducer with DC output. Made from robust stainless steel throughout for continuous vibration monitoring in harsh underwater environments and areas with constant moisture or condensation. Internal electronics are enclosed in a Faraday cage and isolated to minimise noise. Sealed to IP68 with industry standard two‐wire 4‐20mA output proportional to sensor range that can connect directly to PLC, DCS and other industrial controllers. Includes integral heavy duty polyurethane cable and is available with a wide range of mountings. Intrinsically safe data collector Oil and gas Submersible pumps, fans and compressors Mining Dynamic range Integral polyurethane ‐ length to be specified at point of order Certificate details Group II¹

Various cable lengths Optional mountings Filters Other sensitivities (see below) Note: Care should be taken not to install this in a high velocity dust laden atmosphere. ¹ This cable has additional hosing around it manufactured from PTFE plastic, which has a surface resistivity of greater than 1 GΩm and therefore poses a risk from electrostatic ignition. ² Warning ref Group II: The Ci and Li were previously lower. The installer must take account of the increase in internal capacitance and inductance present on this apparatus.