DS0019 Issue 4 Page 1 of 2 MTN/1100W Series Fully submersible industrial accelerometer Red +ve Applications • Submersible pumps • Roll monitors • Paper machinery Blue 0 volts 67mm Ø22mm Screen (connected to case) 25mm A/F Technical Specification Standard Sensitivity Frequency Response Measurement Range Mounted Resonance Isolation Operating Temp Range Electrical Noise Current Range Transverse Sensitivity Bias Voltage Cable Maximum Cable Length Case Material Weight Sealing Mounting Torque Submersible Depth ORDER CODE PART No MTN/1100W MTN/1100WQ 100mV/g ±10% nominal at 80Hz 2 Hz to 10 kHz ±5% (-3dB at 0.8Hz) ±50 g 18 kHz min Base isolated -25 to 90° C 0.1 mg max 0.5 mA to 8 mA Less than 5% 12 Volts DC (nominal) Black Polyurethane - length to be specified at point of order 1000 metres Stainless steel 120 gms (nominal) IP68 8 Nm 100 metres maximum (10 bar) MOUNTING ¼” UNF FEMALE QUICK FIT FEMALE FOR OTHER MOUNTINGS SEE OVER PAGE. Monitran Ltd Monitor House Hazlemere Rd Penn Bucks UK HP10 8AD Tel: +44 (0) 1494 816569 Fax: +44 (0) 1494 812256 email: [email protected] www.monitran.co.uk Monitran reserves the right to alter the specification without prior notice

DS0019 Issue 4 Page 2 of 2 Mounting Adapters and Studs Studs and Grub Screws Quick Fit Adapters Male Studs Product Code MS036 MS039 MS067 MS068 MS124 MS132 Quick Fit (Q/F) From To 1/4" - 28 UNF 1/4" - 28 UNF 1/4" - 28 UNF 1/4" - 28 UNF 1/4" - 28 UNF 1/4" - 28 UNF M6 10 - 32 UNF M8 1/4" - 28 UNF M10 M12 Product Code MS001 MS002 MS003 MS004 MS006 From To Q/F Male Q/F Male Q/F Male Q/F Male Q/F Male Glue base M8 Male M10 Male 1/4" - 28 UNF Male M6 Male Other Adapters Mounting Adapters Product Code MS005 MS007 MS008 MS011 MS013 MS033 MS038 MS061 MS079 MS106 Isolation From To Q/F Male Q/F Male Q/F...