MTN/1100TW

MTN/1100TW

MTN/1100TW

Product catalog summary
Product Overview: The MTN/1100TW Series is a fully submersible industrial accelerometer designed for applications such as submersible pumps, roll monitors, and paper machinery. It features a compact design with dimensions of 25mm A/F, Ø22mm, and 67mm in length.
Technical Specifications: The accelerometer has a standard sensitivity of 100mV/g ±10% at 80Hz and a temperature sensitivity of 10 mV/°C. It offers a frequency response from 2 Hz to 10 kHz with a measurement range of ±80 g. The device is base isolated, operates within a temperature range of -25 to 90°C, and has a maximum electrical noise of 0.1 mg. It requires a current range of 0.5 mA to 8 mA and a bias voltage of 12 Volts DC. The cable is made of polyurethane, with a maximum length of 1000 meters, and the case is constructed from stainless steel. The device weighs 120 grams and is sealed to IP68 standards, allowing for a submersible depth of up to 100 meters.
Mounting Options: The accelerometer can be mounted using various adapters and studs. Options include male studs and quick fit adapters with different thread sizes and configurations to suit specific installation requirements.
System Connection Details: The accelerometer includes a 10mV/°C temperature sensor and requires a constant current source circuit with a current diode. The system operates with a voltage range of +18 to 30 Volts, with specific wiring connections for voltage output and temperature measurement.
See more

Catalog excerpts

MTN/1100TW-1

DS0082 Issue 2 Page 1 of 2 MTN/1100TW Series Fully submersible industrial accelerometer Applications • Submersible pumps • Roll monitors • Paper machinery 67mm Ø22mm Red +ve Accel Yellow +ve Temp Blue 0 Volts (Common) Screen (connected to case) 25mm A/F Technical Specification Standard Sensitivity Temperature Frequency Response Measurement Range Mounted Base Resonance Isolation Operating Temp Range Electrical Noise Current Range Transverse Sensitivity Bias Voltage Cable Maximum Cable Length Case Material Weight Sealing Mounting Torque Submersible Depth ORDER CODE PART No MTN/1100TW MTN/1100TWQ 100mV/g ±10% nominal at 80Hz 10 mV/° C 2 Hz to 10 kHz ±5% (-3dB at 0.8Hz) ±80 g 18 kHz min Base isolated -25 to 90° C 0.1 mg max 0.5 mA to 8 mA Less than 5% 12 Volts DC (nominal) Polyurethane – length to be specified at point of order 1000 metres Stainless steel 120 gms (nominal) IP68 8 Nm 100 metres maximum (10 bar) MOUNTING ¼” UNF FEMALE QUICK FIT FEMALE FOR OTHER MOUNTINGS SEE OVER PAGE. Monitran Ltd Monitor House Hazlemere Rd Penn Bucks UK HP10 8AD Tel: +44 (0) 1494 816569 Fax: +44 (0) 1494 812256 email: [email protected] www.monitran.co.uk Monitran reserves the right to alter the specification without prior notice

 Open the catalog to page 1
MTN/1100TW-2

DS0082 Issue 2 Page 2 of 2 Mounting Adapters and Studs Studs and Grub Screws Other Adaptors Male Studs Mounting Adapters Product Code From To Product Code From To MS036 1/4"-28 UNF M6 MS005 Q/F Male 1/4"-28 UNF Female MS039 1/4"-28 UNF 10-32 UNF MS007 Q/F Male 10-32 UNF Female MS067 1/4"-28 UNF M8 MS008 Q/F Male M8 Female MS068 1/4"-28 UNF 1/4"-28 UNF MS011 1/4"-28 UNF Male Q/F Female MS124 1/4"-28 UNF M10 MS013 1/4"-28 UNF Male Glue Base MS132 1/4"-28 UNF M12 MS033 1/4"-28 UNF Male Q/F Female MS038 Q/F Male M8 Conical Male MS061 1/4"-28 UNF Male 10-32 UNF Male MS079 1/4"-28 UNF Male Q/F Female...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.