- Catalogs
- Monitor Technologies
- VibraRod Vibratory Level Probe
VibraRod Vibratory Level Probe
VibraRod Vibratory Level Probe
- Single-Probe Design: The VibraRod™ uses a single vibrating rod, which avoids clogging and bridging issues common with tuning fork designs.
- No Calibration Required: The sensor is unaffected by environmental and material changes, eliminating the need for calibration.
- Universal Power Supply: Available in high and low voltage designs, accommodating a wide range of power requirements.
- Variety of Configurations: Offered in standard, cable extension, and pipe extension versions to suit different application needs.
- Hazardous Location Approvals: Certified for use in areas with explosive dust.
- Power Requirements: High Voltage (85-265VAC/120-375VDC) and Low Voltage (16-40VAC/19-55VDC).
- Temperature Range: Varies by probe type, with a maximum ambient temperature of 140°F (60°C).
- Pressure Rating: Up to 363 psi for standard and pipe extension probes.
- Material: Probes made from 316Ti stainless steel, with options for aluminum or plastic housing.
Catalog excerpts
“Setting The Standard For Supplier Excellence” i r VibraRod™ Vobi n a tLoervye lTy p e P t Sensors For Solids M Single-Probe Vibrating Rod Design Used for Wide Range of Powders and Other Bulk Solids Easy Setup – No Calibration Universal Power Supply Variety of Probe Configurations
Open the catalog to page 1
Single Probe Vibrating Rod Design Used For Most Solids analyzed by the electronic circuitry. With material present at the probe, the vibration is dampened so that the second crystal is not able to generate as high a voltage as when no material is present. The electronic circuitry senses this change and the relay output changes accordingly. No Clogging/Bridging Like Tuning Fork Designs Unaffected by Environmental & Material Changes – No Calibration Pipe & Cable Extension Units Available The VibraRod™ level sensor provides reliable point level sensing in a wide variety of applications for most...
Open the catalog to page 2
NO CALIBRATION REQUIRED The VibraRod level sensor is very easy to use. Unlike RF Capacitance sensors, no calibration is required. Simple switch adjustments for time delay, fail-safe and sensitivity are all that is required to setup and use the VibraRod sensor. PIPE EXTENSION PROBE For high and low level applications that extend beyond the length of the standard probe, the VibraRod can be provided with a pipe extension probe. This configuration is intended for top mount applications only. The extension is constructed of 1” stainless steel pipe, which provides structural strength and affords a...
Open the catalog to page 3
UNITS UNLESS SPECIFIED Pipe Extension Probe UNITS UNLESS SPECIFIED Cable Extension Probe ORDERING INFORMATION 2= Cable Extension Probe (Specify length from 3= Pipe Extension Probe (Specify length from HOUSING CONSTRUCTION 1 = Ordinary Location(North America) 3 = Hazardous Location ATEX OUTPUT/POWER SUPPLY
Open the catalog to page 4
Power Requirements: High Voltage: Low Voltage: Power Consumption: High Voltage: Low Voltage: * Process Temperature: Standard Probe: Pipe Ext. Probe: Cable Ext. Probe: Ambient Temp: Output Relay: Sensitivity: Time Delay: Fail-Safe: Housing: Mounting Connection: Pressure Rating: Standard Probe: Pipe Ext. Probe: Cable Ext. Probe: Conduit Connections: Local Indicator: Probe Material: Standard Probe: Pipe Ext. Probe: Cable Ext. Probe: Weight: Standard Probe: Pipe Ext. Probe: Cable Ext. Probe: Approvals: 85-265VAC(50/60Hz) or 120-375VDC 16-40VAC(50/60Hz) or 19-55VDC ≤ 2.5VA (AC); 1.2W (DC) ≤ 2.5VA...
Open the catalog to page 5
44W320 Keslinger Road T P.O. Box 8048 T Elburn, IL 601 19-8048 T 800-766-6486 T 630-365-9403 T Fax 630-365-5646 www.flexar.info T www.monitortech.com T www.monitortech.typepad.com T [email protected]
Open the catalog to page 6All Monitor Technologies catalogs and technical brochures
TC-1 & TC-32 Pages
PZP Vibratory Level Probe4 Pages
