“Setting The Standard For Supplier Excellence” k DustAlarm® B reot e cetno rB a g D M Know When to Replace Filters in Dust Collectors Protect Blowers from Damage Help Comply with Clean Air Act

Field-Proven Triboelectric Measurement Ensures Reliability DUST COLLECTOR Adjustable Sensitivity, Alarm Level And Time Delay For Operation With A Wide Variety Of Powders And Bulk Solids Integral Assembly Of Sensor And Electronics In Rugged NEMA 4 Housing Remote Electronics/Probe Option Available 316 Stainless Steel Probe With Specially Designed Insulator MONITOR LEVEL INDICATOR Multi-Colored LED Indicator Makes Setup Quick and Easy Typical Baghouse Application Quick-Disconnect Mounting Provides For Ease Of Installation And Maintenance the electronics. When the signal exceeds a preset level, a...

The Monitor DustAlarm Broken Bag Detector offers the fol- lowing features: SENSITIVITY ADJUSTMENT The tri-color SIGNAL LED guides the user through the sensi- tivity adjustment procedure. This LED can be yellow, green or red. While the dust collector is running efficiently and clean, the user adjusts the sensitivity until the LED is green. ALARM POINT ADJUSTMENT The alarm point is adjusted by setting the Alarm LEVEL con- trol (1 to 10 times the baseline signal level). The emission level exceeding the alarm point, is indicated by illuminating TIME DELAY The time delay feature enhances operation...

Power Requirements: Ambient Temperature: Process Temperature: Output: Sensitivity Range: Smoothing: Sensitivity Setpoint: Alarm Threshold: Alarm Time Delay: Fail-Safe: Electrical Connections: 105 to 130 VAC, 50/60Hz; 210 to 260 VAC, 50/60 Hz; 10 to 32 VDC -20˚ to 150˚ F (-30˚ to 65˚ C) up to 160˚ F (70˚ C); up to 450˚F (235˚C) for remote probe electronics option (2) SPDT isolated relay contact sets; 5 amps @ 250VAC max or 30VDC 0.0005 grains/dscf (1 mg/m 3), typical detection at maximum sensitivity; 100 to 1 adjustable range Adjustable from 0.1 to 22 seconds Baseline level setting indicated by...