AUTOMATIC CASE ERECTOR MOD. “376”.

Product catalog summary

Overview: The Automatic Case Erector Model 376 is designed to erect 'American' style cases with bottom flaps closure using either adhesive tape (model 376/N) or Hot Melt glue (model 376/C).

Features:

Horizontal flat case magazine located at the machine's back center.
Multifunction carriage for case pick-up, opening, and transfer with electromechanical control.
Electro-pneumatic control for automatic closure of lower short flaps.
Automatic closure of long flaps during case movement.
Bottom case closure taping unit using adhesive tape.
Control devices for detecting case presence in the magazine, during translation, and overflow at the out-feed.
'Touch-screen' display for managing machine functions, changeovers, and visualizing anomalies.
Complete with electrical installation, panel, and safety guards.
Managed by a Siemens S7 PLC.

Specifications:

Output: 15 to 23 cases per minute (cpm).
Case magazine capacity: 100 to 150 cases.
Power installed: 1.5 kW plus glue group (3.5 kW).
Working pressure: 5 bar.
Compressed air diameter: 1/2 inch.
Air consumption: 80 to 100 liters per minute.

Case Dimensions:

Minimum dimensions (a x b x c): 150 x 140 x 200 mm.
Maximum dimensions (a x b x c): 400 x 400 x 500 mm.

Note: Data sheets of equipment are not binding data.

Catalog excerpts

AUTOMATIC CASE ERECTOR MOD. “376”. Machine suitable to erect “American” style cases with bottom flaps closure by means of adhesive tape (mod.376/N) or Hot Melt glue (mod. 376/C). Features Flat case magazine mounted horizontally on machine back center zone. Multifunction carriage able to pick-up, open and transfer the case with an electromechanical control. Automatic closure of lower short flaps electro-pneumatically controlled. Automatic closure of long flaps when case is moving. Taping unit for bottom case closure with adhesive tape. Control devises to detect case presence into magazine, during translation and the over-flow at the out-feed. “Touch-screen” display to manage machine functions, the changeover and to visualize possible anomalies. Machine complete of electrical installation, electrical panel and safety guards. Machine managed by a PLC Siemens S7. CASE ERECTOR I MOD. 376 Output Case magazine capacity

Open the catalog to page 1