Track‐It™ Temperature Data Loggers Description The Track‐It™ Temperature Data Logger is a battery powered stand alone compact data logger that records up to 64,000 samples of temperature data. The unit is easily configured using the included Track‐It™ Software. Simply plug the logger into an open USB port on your PC and the software automatically identifies the logger. Set the unit up to start and stop recording at a predetermined time and date or only when an alarm condition is sensed. The sample storage rate can be set from 1 sample every 2 seconds up to 1 sample every 24 hours. The on board data storage is non‐volatile so data will not be lost in the event of a depleted battery. The Track‐It™ Temp Logger can be ordered with or without an LCD display. Information displayed on the LCD is also user programmable and can be sequenced by pressing the logger button. Both models have a multicolored LED indicator to notify user of alarms or general activity. A splash proof protective cover protects the logger when in use. Push button or program to start recording Up to 64,000 samples per record Alarm set points Small compact size Integral USB interface (no custom cable!) Interactive software (included!) N.I.S.T. calibration available One year battery life (battery included!) Optional five year battery life Wide temperature range –4 to 185F/85C High accuracy and repeatability Accurate internal clock (1 minute/year) Multiple

Track‐It™ Temperature Data Loggers Specifications General Record: Record Mode: Display: LED: Button: Alarms: Communication: Software: Battery: Measurement Sample Rates: User configured 1 every 2 seconds to 1 every 24 hours No. of Samples: 32,000 or 64,000 (depends on setup) Two independent triggers. Multiple trigger modes: Instantaneous, button control, on alarm, time and date (start and stop), day of week Fill to end of memory; cyclic, number of samples, time dura‐ tion 4 digit LCD (Non display versions available with LED only) User programmable: Indication of data value, eng units, ...