Track‐It™ AC Event Data Logger Description The Track‐It™ AC Event Data Logger is a battery powered stand alone compact data logger that records up to 64,000 events. Use the Track‐It™ Event Logger to monitor cycle patterns of pumps, blowers and other electrical equipment powered by 120 or 240VAC. The unit is easily configured using the included Track‐It™ Software. Simply plug the logger into an open USB port on your PC and the software automatically identifies the logger. Use our memory conservation feature to record only when the state changes, or set the sample storage rate to record from 1 sample every 2 seconds up to 1 sample every 24 hours. Start and stop recording at a predetermined time and date or only when an alarm condition is sensed. The on board data storage is non‐volatile so data will not be lost in the event of a depleted battery. The Track‐It™ AC Event Logger can also be used to record ambient temperature along with on/ off cycles. This can help diagnose heat vs. cycle time issues. Information displayed on the LCD is also user programmable and can be sequenced by pressing the logger button. The multicolor LED indicator notifies the user of temperature alarms or general activity. Use button or PC to start your record Up to 64,000 samples Monitor cycle frequency and duration Record AC ON/OFF cycles 120/240 VAC 50/60 Hz Alarm set points Small compact size Integral USB interface (no custom cable!) Interactive software (included!) One year battery life (battery included!) Optional three year battery life High accuracy and repeatability Accurate internal clock (1 minute/year) Multiple user programmable displays Ambient Temperature Sensor included Monitor lead/lag pump cycles AC machinery run times AC Motor efficiency studies Predictive maintenance

Track‐It™ AC Event Data Logger Specifications General Record: Record Mode: Display: LED: Button: Alarms: Communication: Software: Battery: Measurement Sample Rates: State changes only or 1 every 2 seconds up to 1 every 24 hours No. of Samples: 64,000 Two independent triggers. Multiple trigger modes: Instantaneous, button control, on alarm, time and date (start and stop), day of week or on event only. Fill to end of memory; cyclic, number of samples, time duration 4 digit LCD User programmable: Indication of data value, eng units, alarms, record mode, battery condition, time/date, memory ...