METALWORKING
12Pages

LUBRICATION SOLUTIONS METALWORKING FLUIDS

ROLLER LUBRICATION REDUCE COSTS IMPROVE PRODUCTIVITY ROLLER LINE • Optimal spreading and control of the lubricant • For any kind of lubricant © Shu�erstock - MOLYDAL - Newic - 2018 • No mist • Very significant oil consumption reduction • Comply with the most demanding HSE requirements • High reliability • Very low maintenance costs • Different widths available ZAET, 221 rue Paul Langevin, 60740 Saint Maximin, France Tél : +33 (0)3 44 61 76

MOLYDAL since 1958 PRODUCTS LIST Leader in the production of metalworking fluids, MOLYDAL offers a complete range of products and solutions complying with users’ technical and environmental requirements: • Vanishing fluids • Neat oils • Minimal quantity lubrication oils • Soluble oils To meet each customer’s needs, MOLYDAL has developed: • VOC-free eco-responsible products; MOLYDAL’s R&D laboratory is particularly involved in the design of new vegetable-based products. • High-performance products for the cutting operations. • Drawing and profiling sectors. • Lubrication systems with rollers...

EVAPORABLES FLUIDS Flash point Light duty Medium duty Heavy duty Fast-evaporating colourless fluid with a hydrocarbon base. Approved by NSF on the requirements of the FDA, in category H1, registration 129621. For cold deforming of all metals of slight thickness. Makes it possible to avoid subsequent degreasing operations. Can be bonded, welded, and painted. For all cutting, stamping, profiling, folding, cambering, and light stamping operations on all types of metals (ferrous metals, stainless and coated steels, cuprous, bronze, brass, aluminium, and its alloys) of slight thickness....

Colourless liquid product made up of hydrocarbons reinforced with extreme-pressure, anti-wear additives as well as smoothening agents. Characterised by a near absence of sticky residues, white traces after evaporation. Does not clog spraying systems or nozzles. For all operations of: cutting; stamping; folding; cambering; rolling; profiling. On all metals. Ready for use and does not require any preparation or any control of the concentration. Can be applied indifferently: to felt; to the roller; as drip feed; by spraying at a rate of 1 to 4 grammes per m2 according to the operation....

Aspect, Colour 4 balls test : welding (kg) 4 balls test : wear (mm) Pale yellow Pale yellow Light duty Medium duty Heavy duty Light cutting and stamping Deep-drawing and heavy stamping • Drilling, threading, tappind, sawing H 125 AL NEAT OIL FOR INCIDENTAL CONTACT WITH FOODSTUFFS DESCRIPTION High-viscosity mineral oil for direct and indirect contact with foodstuffs. Approved by NSF on the requirements of the FDA, in category H1 and 3H, registration 137920. Silicone-free. Can be used on all metals and compatible with most elastomers and plastic materials. Colour: Colourless. For cutting or...

H 526 NON-CHLORINATED NEAT OIL DESCRIPTION Mineral based cutting fluid. Free from chlorine. Made with renewable resources improving antifriction power. Medium viscosity fluid for any kind of stamping and cutting operations on any materials. H 570 CHLORINE-FREE METALWORKING NEAT OIL DESCRIPTION Chlorine-free minreal based cutting fluid. Superior antifriction properties thanks to renewable materials additivation. High viscosity oil for deep drawing and heavy stamping operations. LUBA 21 ECOFRIENDLY LUBRICANT FOR PROFILING AND LIGHT CUTTING OPERATIONS DESCRIPTION Cold forming chlorine-free...

LUBA 50 ECOFRIENDLY EXTREME PRESSURE LUBRICANT FOR DEEP-DRAWING OPERATIONS DESCRIPTION Cold forming chlorine-free fluid. Designed to replace solvanted oils and mineral based fluids. Made from vegetal synthetic esters, it possesses an outstanding wetting power allowing better parts finishings and longer tools lifetime. For deep-drawing operations on any materials: steel, stainless steel, aluminum, copper and their alloys (on copper, rinse off immediately). Suitable for threading and drilling operations on stainless steel and inconel. LUBA 200 EXTREME PRESSURE ECO-FRIENDLY LUBRICANT FOR...

HCB 400 NEAT OIL FOR MICRO-SPRAYING DESCRIPTION Low-viscosity synthetic cutting fluid, formulated on an ester base, reinforced with an extreme pressure and anti-wear additive. For machining operations using micro-spraying, reducing the amount of lubricant and increasing cutting speeds. For drilling, tapping, sawing, milling, etc. operations… Also used for cross-cutting aluminium profiles. Machining fluids STAREX EXTREME PRESSURE CUTTING OIL DESCRIPTION Special extreme pressure oil for accurate and localised application. Can be used on all grades of steel and on light and cuprous alloys. For...

SOLUBLE OILS SOLCUT 700 BS Refractometer reading coeficient Light duty Emulsion stability Medium duty Heavy duty Profiling SOLCUT 700 BS CHLORINE-FREE MULTI-PURPOSE SOLUBLE OIL DESCRIPTION Milky emulsion with good stability. It can be used with ordinary water. Guaranteed bore-free as well as being free of chlorine derivatives, secondary amines, and formaldehyde. Can be used on all types of metals (ferrous, cuprous, and aluminium). Effective protection against corrosion for parts, tools, and machines. For all chip-removal operations. Machining, threadcutting, tapping, drilling, turning, and...

MINIMUM QUANTITY LUBRICATION Microlubrication consists in dosing and delivering a very small amount of lubricant thanks to a nozzle and a micropump. The liquid flows from the reservoir into a piston pump. This pushes an exact quantity of the lubricant into the internal feed tube. Separately supplied compressed air splits the medium at the nozzle tip and sprays it. External MQL in all metal-cutting operations. Pinpoint or small area lubrication in chipless forming operations. Application of mould release and anti-corrosion agents or other spray-on substances. ADVANTAGES: • Workstation...

A French company on a human scale engaged in certification and approval processes, MOLYDAL continues to consolidate its presence in Europe and pursue its development worldwide. The company’s know-how has enabled it to offer a complete range of products and equipment intended for all business sectors (Metalwork, food industries, sugar industries, iron industry, granulation industry, plastic injection, automotive, energy, etc.), where certain approvals are sometimes required (PMUC, NSF, etc.). • Quality policy with a product range designed in compliance with all regulations in force. • Pursue...