FOOD GRADE LUBRICANTS LUBRICATION SOLUTIONS

MOLYDAL since 1958 Consumers are increasingly demanding greater assurance and traceability in the food sector. Manufacturers are taking action to provide guarantees in terms of food safety. This is why Molydal must implement optimal lubrication solutions and guarantee the traceability and safety of its products, for example through NSF certification, which is well known to food and agri-food manufacturers. NSF International is an accredited independent certification body that tests and certifies products to ensure they meet these public health and safety standards. Products that meet the standards...

With these two logos, products for the food industry approved by the NSF or 2probity (European food certification body) in the following categories can easily be identified: • K1 for solvent-based cleaners - Products for untreated areas • A1 for general cleaners • H1 for general accidental contact lubricants • 3H for lubricants in direct contact With MOLYDAL’s own logo «MOSH MOAH FREE LUBRICANTS», products containing neither MOSH nor MOAH, important criteria for the food industry, can be identified. • MOSH: Mineral oil saturated hydrocarbons • MOAH: Mineral oil aromatic hydrocarbons These substances...

Reduction of MOSH and MOAH contaminants in the food industry MOSH and MOAH food contaminants negotiations aimed at defining, at European level, health risk management measures. LAW No. 2020-105 of 10 February 2020 Mineral oil hydrocarbons are mainly derived from crude oil. (AGEC - Anti-waste and circular economy law) They are divided into two main categories: Decree No. 2020-1725 of 29 December 2020, containing various adaptation provisions relating to extended producer responsibility (EPR), defines the conditions for the ban on mineral oils in packaging and print media intended for the public...

GREASES & PASTES MULTI-PURPOSE GREASES PTFE WHITE GREASE DESCRIPTION Clean lubrication. Good resistance to water and dust. Infusible (does not leak). Long-term lubrication. Flat nozzle spray together with extension tube for hard-to-reach areas. GR PTFE AL is registered by NSF International, in category H1. This indicates that it is authorized for use in incidental contact with food. (N° 163619) USE Industrial bakeries, biscuits, dairy plants, slaughterhouses. Plumbery, general mechanics ... PACKING 650 / 400 ML TECHNICAL DATA • Operating rage of temperatures: -20°C to +200°C (250°C for dry lubrication)...

GREASES FOR HIGH TEMPERATURES TECHNICAL DATA Synthetic grease with high lubricating properties. Water repellent, it resists to steam and chemically agressive environments. Recommended for thermic transfers. Possesses good electrical insulation properties and excellent compatibility with rubbers and plastics. MOSH-MOAH and POSH free lubricant. AL SI 55 is registered by NSF International, in category H1. This indicates that it is authorized for use in incidental contact with food. (N°160433) Long-term lubrication of small mechanisms, (threads, joints, guides, locks etc). protection of electrical...

WATER RESISTANT GREASES AGL 80 AL MOSH-MOAH & POSH FREE WHITE GREASE GREASES & PASTES Lubricating grease made of biodegradable esters. Its fully synthetic base oil offers an optimised lifetime to lubricated mechanisms. AGL 80 AL has a good resistance to water washout, steam and detergents. It is free from mineral oil (MOSH-MOAH) and free from polyolefin (POSH). AGL 80 AL AL is registered by NSF International, in category H1. This indicates that it is authorized for use in incidental contact with food. (N°160760) TECHNICAL DATA Lubrication of bearings in pellet presses and crushing process (trituration)....

* Operating temperature range:-50°C to +200°C Viscosity @ 40°C: 90 cst * Operating temperature range:-20°C to +160°C Viscosity @ 40°C : 165 cst • Operating temperature range:-20°C to +180°C Non-flammable propellant: CO2 NS 100 ALECOFRIENDLY LUBRICANT FOR CHAINS, MOSH, MOAH, POSH FREE Ecofriendly synthetic chain oil specifically designed to stand very low and very high temperatures. good resistance in dump and dusty environment. Clean lubricant that doesn't leave any carbonisation residual and it doesn't pollute chains or painted parts. Free from MOSH-MOAH and POSH. NS 100 AL is registered by...

P 716 ANTI-STICKING LUBRICANT ECOFRIENDLY Synthetic and multipurpose lubricant that can be used for assembling, releasing, unmoulding and lubricating operations in any kind of industries such as agrofood or automotive. Free from any mineral resources: exclusively formulated from renewable materials. MOSH-MOAH and POSH free lubricant. P 716 is registered by NSF International, in category H1. This indicates that it is authorized for use in incidental contact with food. (N°162094). * Operating Temperatures range:-20°C to 200°C Viscosity @ 40°C: 42-50 cst 100% of «easily biodegradable» raw material...

LUBRICATING OILS » Operating temperature range:-20°C to +150°C Viscosity @ 40°C: 22 cst MPR > 80% TECHNICAL DATA ■ Viscosity @ 40°C: 32 Cst for HYDRO 32 AL Viscosity @ 40°C: 46 Cst for HYDRO 46 AL Viscosity @ 40°C: 68 Cst for HYDRO 68 AL H VGMOSH-MOAH AND POSH FREE LUBRICANT - LUBRICATING FLUID FOR DIRECT CONTACT Clean and general-purpose lubricant recommended for lubrication operation, cutting or light stamping in all fields of activities in the food industry. Free from silicone, allergens and GMO. This product is also acceptable for use as a release agent on grills, ovens, loaf pans, boning...

UNIVERSAL SOLVENT-BASED DEGREASERS TECHNICAL DATA DEGREASERS QUICK EVAPORATING MULTIPURPOSE WORKSHOP CLEANERDESCRIPTION Spray cleaner with very strong solvent properties. Guaranteed chlorine-free, HCFC-free and ethylene-glycol free. Inert on rubbers and most plastics (test to be carried out before use). Dry surface condition after evaporation in a few seconds. STARNET+ is registered by NSF International, in category K1. This indicates that it is authorized for use in incidental contact with food. (N°162096). USE For all degreasing operations on all metals where quick evaporation is required....