Shielding Application
20Pages

Cable Protection Solutions

OfSPH^S Cable Protection Solutions for Shielding Applications G Electromagnetic interference (EMI) is noise that may interrupt, obstruct, or degrade a signal. This results in a partial or even total loss of data. Electromagnetic interference resistance is the ability of an electric or electronic unit to function within its own magnetic surroundings without interfering with, or receiving disturbance from, other equipment operating in the same field. Common problem areas include: O Ignition Systems in Motor Vehicles Switchingand Regulating Connections Our EMI Shielding System virtually...

OfSPH^S Cable Protection Solutions for Shielding Applications G STOP using expensive shielded cables that have high minimum order quantities. Wires and cables are fully protected using our unique cable protection solutions for shielding applications. Secure and easy to use, our system delivers: O North American and European EMI/EMC requirements O Protection of up to IP68 / NEMA 6P (1500 psi jet spray O Excellent compression and impact strength even at low O Enhanced flexibility and fatigue strength O Excellent UVand weathering resistance O Countless interface options O Fully reusable system...

OfSPH^S Cable Protection Solutions for Shielding Applications G Screening attenuation and transfer impedance measurements on EMI fittings Fittings under test: Test Methods: 1 - Screening attenuation according to IEC 62153-4-4 1 - Transfer impedance according to IEC 62153-4-3 The reported data in the following graphs are average values extrapolated from all performed tests by TUV laboratory. Transfer impedance at 300 kHz is less that 3mOhm/m and less than 15mOhm/m for frequency less than 10OMhz.

LHT Highly Flexible, Heavy Duty Conduit The main characteristic of this medium to heavy walled polyamide 12 conduit / tubing is the high fatigue strength while undergoing reverse bending stress. LHT is ideal for continuous dynamic use at very low temperatures. With its smoke, flame and toxicity certifications and excellent UV and weathering resistance, LHT is particularly suitable for outside dynamic use on people movers, railway vehicles (roof, bogie & undername), public transit, robotic applications and solar tracking systems & arrays. • High-grade, specially formulated polyamide 12 •...

GDKSHSS BCU F Tinned Copper Flat Braid Tin-plated copper braid is safely used against magnetic fields. It is suitable for grounding of electrical cabinets, automotive and railways. It is also used as an extra-flexible conductor and connected to the fittings, guarantees continuity and meets the requirements of shield protection, including power, grounding and equipotential connection. Covering rate of the braid greater than 95%. • Made in compliance with AA59569 • Raw material meets ASTM B33 requirement TYPE FLAT

Straight, Female Metal Thread, EMI Connector • Locking device system provides a quick and secure push-in connection of corrugated conduits • High-grade formulated polyamide • EMI/EMC end made of nickel-plated aluminum • Low transfer impedances • 360° clamping effect: For high shielding efficiency • Self-extinguishing, free from halogens and cadmium • Excellent impact strength • Temperature range: -40°C(-40°F) to 105°C(221°F) • Short-term to 160°C(320°F) • Up to IP68 / NEMA 6P protection with the reinforced sealing cap at conduit side THREAD TYPE SERIES TYPE UNEF METAL THREAD Specifications...

Straight, Female Metal Thread, EMI Connector ACCORDING TO • Designed to thread directly onto circular connectors & houses environmental seal • Locking device system provides a quick and secure push-in connection of corrugated conduits • High-grade formulated polyamide • EMI/EMC end made of nickel-plated aluminum • Low transfer impedances • 360° clamping effect: For high shielding efficiency • Self-extinguishing, free from halogens and cadmium • Excellent impact strength • Temperature range: -40°C(-40°F) to 105°C(221°F), Short-term to 160°C(320°F) • Up to IP68 / NEMA 6P protection with the...

90º Elbow, Female Metal Thread, EMI Connector • Locking device system provides a quick and secure push-in connection of corrugated conduits • High-grade formulated polyamide, EMI/EMC end nickel-plated aluminum • 360° clamping effect: For high shielding efficiency, Low transfer impedances • Self-extinguishing, free from halogens and cadmium • Temperature range: -40°C(-40°F) to 105°C(221°F), Short-term to 160°C(320°F) • Up to IP68 / NEMA 6P protection with the reinforced sealing cap at conduit side L THREAD TYPE SERIES TYPE THREAD SIZE Fits to Fits to A NW Braid mm in UNEF METAL THREAD...

45º Elbow, Female Metal Thread, EMI Connector • Locking device system provides a quick and secure push-in connection of corrugated conduits • High-grade formulated polyamide, EMI/EMC end nickel-plated aluminum • 360° clamping effect: For high shielding efficiency, Low transfer impedances • Self-extinguishing, free from halogens and cadmium • Temperature range: -40°C(-40°F) to 105°C(221°F), Short-term to 160°C(320°F) • Up to IP68 / NEMA 6P protection with the reinforced sealing cap at conduit side THREAD TYPE SERIES TYPE THREAD SIZE UNEF METAL THREAD Specifications are subject to change...

Straight, Male Metal Thread, EMI Connector • Locking device system provides a quick and secure push-in connection of corrugated conduits • High-grade formulated polyamide • EMI/EMC end made of nickel-plated aluminum • Low transfer impedances • 360° clamping effect: For high shielding efficiency • Self-extinguishing, free from halogens and cadmium • Excellent impact strength • Temperature range: -40°C(-40°F) to 105°C(221°F) • Short-term to 160°C(320°F) • Up to IP68 / NEMA 6P protection with the reinforced sealing cap at conduit side THREAD TYPE SERIES TYPE METRIC METAL THREAD Specifications...