Catalogs >
Molex >
Polymicro Silica/Silica Optical Fiber FV

Polymicro Silica/Silica Optical Fiber FV
1Pages

Catalog excerpts

Polymicro Silica/Silica Optical Fiber FV - 1

• High -OH SILICA/SILICA Optical Fiber Polymicro FI Silica/Silica Optical Fiber FV StepCharacteristics index class VI* Polyimide Buffer Standard; Silicone, Acrylate, Step Index Tighter tolerances available Numerical aperture: 0.22 ± 0.02 Characteristics High-Temperature Acrylate also available. Numerical Aperture: 0.22 ± 0.02 High -OH silica core, doped silica cladBuffer Standard; Silicone, Acrylate, Full acceptance cone: 25.4 degrees H Polyimide H Step Index Polyimide ConcentricityTemperature: < 3µm Full Acceptance Cone: 25.4 degrees High-Temperature Acrylate also available. H Numerical Aperture: 0.22 ± 0.02 Sizes for Bundling UV-Vis-NIR Transmission, 180nm Polyimide buffer standard; silicone, to 1,150nm operating UV-Vis-NIR transmission, 180nm to Cone: 25.4 degrees H Polyimide Concentricity < 3µm –65°C to +300°C Full Acceptance Superior Radiation Resistance 380nm to 2,200nm Tighter Tolerances Available acrylate, high-temperature for Bundling intermittent, up to 400°C 1,150nm H Sizes H Vis-NIR Transmission, High Laser Damage Threshold acrylate also available. Tighter Tolerances Available +300ºC Temperature: Operating – 65ºC to H H Radiation Resistant Proof tested to 100kpsi Superior Sterilizable & Bio-compatible – USP Class VI* radiation resistance H High Laser Damage Threshold H Temperature: Operatingto65ºC to +300ºC Intermittent, up – 400ºC Polyimide concentricity < 3μm H Core, Doped Silica Clad High -OH SilicaSterilizable & Bio-compatible – USP Class VI* Proof Tested to 100kpsi Intermittent, up to 400ºC High laser damage threshold H Low-OH Silica Core, Doped Silica Clad Product Product Descriptor Descriptor(µm) Core Product Descriptor Core (µm) (µm) Clad (µm) Buffer High -OHUltra Low -OH Core Clad Buffer (µm) (µm) Core Core ** Acrylate buffer * Recommended for UV for UV wavelengths Availability varies. * Recommended wavelengths only. only. Availability varies. DopedDoped 3 Silica Clad Doped Silica Clad Silica Clad Polyimide 5 Polyimide Polyimide Buffer 10 BufferBuffer Note: The items listed in this table ± 4 Note: are standardlisted in this and The items configurations table Note: The items listed in this table ± 5 sizes. Other configurations may be ±are standard configurations and 10are standard configurations and 1100 ± 30 sizes. available on request. Please let us Other configurations may be know what we can do to may be sizes. Other on request. Please let us configurations help 70 ± 140 4 ± 85 ± 3available your project requirements. 2 satisfy 140 ± 3 4 availablewhatrequest. to help satis140 ± 3 170 ± 5know on we can do 4 275 ± 5 275 ± 1050 ± 15 5 1250 ± 40fy your project requirements. FVP320385415 * Not recommended for wavelengths greater than 1000nm. 8 320 ± 8 385 ± ** Not recommended for wavelengths greater thanthan 1000nm. ** Not recommended for wavelengths greater 1000nm. *** Acrylate buffer *** Acrylate buffer; Operating temperature: -65° to 80°C Typical Attenuation * The end manufacturer is responsible for bio-compatibility and sterilization testing and validation studies. 18019 N. 25th Avenue • Phoenix, AZ 85023-1200 Voice: (602) 375-4100 Fax: (602) 375-4110 E-Mail: testing and validation studies. * The end manufacturer is responsible for bio-compatibility and sterilization polymicrosales@molex.com URL: http://www.polymicro.com * The end manufacturer is responsible for bio-compatibility and sterilization testing and validation studies. 18019 N. 25th Avenue • Phoenix, AZ 85023-1200 Voice: (602) 375-4100 Fax: (602) 375-4110 E-Mail: polymicrosales@molex.com USA/GF/2017.09 URL: http://www.polymicro.com Flexible Capillary Multimode Optical Fiber Specialty Assemblies Micro-Components

Open the catalog to page 1