Catalogs >
Molex >
I/O Products

I/O Products
94Pages

Catalog excerpts

*HDMI is a trademark of HDMI Licensing, LLC †DisplayPort is a trademark of Video Electronics Standards Association (VESA) ‡InfiniBand is a trademark of the InfiniBand™ Trade Association

Open the catalog to page 1

0.80mm (.031") Pitch Small Form-Factor Pluggable (SFP/SFP+) Receptacle Features and Benefits • Connector used in conjunction with pluggable transceiver modules allows you to mate copper cable or optical cable assemblies without changing host board • Card entry slot to accept 1.00mm (.039") thick integrated circuit board (located inside pluggable module) • Alignment posts provide stability for placement on the PCB • Standoffs allow easy PCB cleaning after soldering • SMT receptacle provides option for placement on either side of PCB • Meets MSA standards Reference Information Packaging: Tape...

Open the catalog to page 2

Multi-Port SFP (Small Form-factor Pluggable) EMI Cage 74722/74728/74723/74747 Ganged Features and Benefits • Ganged SFP design offers significant PCB width savings over the single cage solution • 360˚ conductive elastomeric gasket and multiple ground pin locations provide advanced shielding to the bezel • Press-fit pin design accommodates belly-to-belly applications to ensure best use of PCB real estate • Built in tabs allow addition of ganged lightpipe covers Mechanical Durability: 1 cycle Physical Cage housing: C770 Alloy Plating: Nickel PCB Thickness: 1.57mm (.062") min. Reference...

Open the catalog to page 3

0.80mm (.031") Pitch 2-by-1 SFP Stacked Multi-Port Connector Features and Benefits • Integrates 2 SFP ports and LED lightpipes into 1 connector • Press-fit termination to PCB • Fully shielded for EMI protection • Lightpipes for port status and activity feedback 75640/75462 25.50mm (1.004") Height With Press-Fit PC Tails With and Without Lightpipes Reference Information Product Specification: PS-75310-001 Packaging: Tray UL File No.: E29179 CSA File No.: LR19980 Mates With: SFP transceivers or cables Designed In: Millimeters Lightpipes 2 per port 1 per port, inner 1 per port, outer None...

Open the catalog to page 4

0.80mm (.031") Pitch 2-by-2 SFP Stacked Multi-Port Connector Features and Benefits • Integrates 4 SFP ports and LED lightpipes into 1 connector • Press-fit termination to PCB • Fully shielded for EMI protection • Lightpipes for port status and activity feedback 75714/75759 25.50mm (1.004") Height With Press-Fit PC Tails With and Without Lightpipes Reference Information Product Specification: PS-75310-001 Packaging: Tray UL File No.: E29179 CSA File No.: LR19980 Mates With: SFP transceivers or cables Designed In: Millimeters Electrical Voltage: 30V Current: 0.5A max. Contact Resistance: 10...

Open the catalog to page 5

0.80mm (.031") Pitch 2-by-5 SFP Stacked Multi-Port Connector Features and Benefits • Integrates 10 SFP ports and LED lightpipes into 1 connector • Press-fit termination to PCB • Fully shielded for EMI protection • Lightpipes for port status and activity feedback 75734/75733 25.50mm (1.004") Height With Press-Fit PC Tails With and Without Lightpipes Reference Information Product Specification: PS-75310-001 Packaging: Tray UL File No.: E29179 CSA File No.: LR19980 Mates With: SFP transceivers or cables Designed In: Millimeters Lightpipes 2 per port 1 per port, inner 1 per port, outer None...

Open the catalog to page 6

1.27mm (.050") Pitch SFP (Small Form-Factor Pluggable) Copper Cable Assembly 73929 Passive Features and Benefits • Compliant with SFP MSA • Fibre Channel data rates to 2.125 Gbps • Gigabit Ethernet data rates to 2.5 Gbps • InfiniBand* data rates to 2.5 Gbps • Hot pluggable • Intuitive “squeeze and pull” latching mechanism • Supports Serial ID functionality Reference Information Packaging: Bag and box UL File No.: E72548 vol. 1C Mates With: 74441 Use With: 73927, 74722, 74728, 74729, 74737 and 74748 Designed In: Millimeters Mechanical Durability: 250 cycles Physical Housing: Zinc diecast...

Open the catalog to page 7

4 Gbps SFP (Small Form-factor Pluggable) Copper Cable Assembly 74742 Passive Reference Information Packaging: Bag UL File No.: E72548 vol. 1C Mates With: 74441 Use With: 73927, 74722, 74723, 74728, 74737 and 74747 Designed In: Millimeters Features and Benefits • Improved PCB design helps match impedance to reduce reflection at higher speeds • Serial ID allows serial identification of each SFP transceiver • Compliant with SFP MSA and designed to meet FC, IB and GE standards • Unique thumblatch provides intuitive squeeze and pull latching mechanism Electrical Voltage: 3.3V Current:...

Open the catalog to page 8

1000 BaseT RJ-45 SFP (Small Form-Factor Pluggable) Copper Transceiver Features and Benefits • 1000 Base-T compliant, meets IEEE802.3z, ab • SFP MSA compliant • Hot pluggable, eliminating the need to power down to remove or install • Auto negotiation software selectable • Side-to-Side latching for increased density • Serial ID allows individual identification of each SFP transceiver Reference Information Packaging: Bag Mates With: 74441 Use With: 74737 and 73927 Designed In: Millimeters Options Auto Negotiation On, LOS GRD Auto Negotiation On, LOS Toggle Mechanical Transceiver Retention to...

Open the catalog to page 9

SFP+ Cage Features and Benefits • Press-fit, solder post and PCI pin styles enable use with various PCB thicknesses and assembly processes • One piece stamped and formed cage is able to meet RoHS requirements by eliminating solder • Newly designed spring finger gasket provides optimal EMI grounding Mechanical Durability: 1 cycle Physical Housing: Copper Alloy Plating: Nickel PCB Thickness: 1.57mm (.062") min. Reference Information Packaging: Tray Mates With: 74754 cable and 74763 loopback Use With: 74441 connector Designed In: Millimeters Pin/Leg Style Press Fit Press Fit (Belly-to-belly)...

Open the catalog to page 10

SFP+ Lightpipe Covers Features and Benefits • Lightpipes compensate for misalignment and help ensure uniform panel illumination • Mechanically attaching lightpipes to the lightpipe cover reduces assembly time and eliminates processing issues • Cage mounted tabs ensure proper cover placement 74754 For Single and Multiport EMI Cages Low Profile Physical Lightpipe: UL 94V-0 Lightpipe Cover: Copper Alloy Lightpipe Cover Plating: Nickel Reference Information Packaging: Tray Mates With: 74754 cages Designed In: Millimeters 0.80mm (.031") Pitch 2-by-1 SFP+ Stacked Multi-Port Connector...

Open the catalog to page 11