The Carbide Integral Type Arbor for High Efficient Machining. Red Screw Arbor BT-RSG, A-RSG N e w P ro d u c t N e w s No.1402E-2 2 0 1 7 - 8

Displaying the highest cutting performance of any Modular Mill! Features of Red Screw Arbor Highly rigid design makes the best use of Carbide alloy properties (high Young's modulus). Carbide, integral type eliminates slipping. Without chatter for deep standing-wall machining. Compatible with center-through coolant Compatible with various modular tools ASRM 多刃タイプ Many effective lengths for machining

Series expanded to include many different effective lengths ■ Option • Retention knob ■ Caution •Some of the indexable end mills cannot be attached to the RED screw arbor. Please check your indexable end mills for conformance to the dimensions, or please contact Mitsubishi Hitachi Tool Engineering, Ltd. •Because cutting resistance is greater than the tool holder connection force associated with the machine spindle, please reduce the recommended cutting conditions by 50% for the RED screw arbors marked with ^. Otherwise, the tool holder shank may experience fretting corrosion or fall out of the...

No Mark : Manufactured upon request only. Delivery time is about ten days after an order received.

Series expanded to include many different effective lengths ■ Option •Coolant duct ■ Caution •Some of the indexable end mills cannot be attached to the RED screw arbor. Please check your indexable end mills for conformance to the dimensions, or please contact Mitsubishi Hitachi Tool Engineering, Ltd. •Because cutting resistance is greater than the tool holder connection force associated with the machine spindle, please reduce the recommended cutting conditions by 50% for the RED screw arbors marked with ^. Otherwise, the tool holder shank may experience fretting corrosion or fall out of the machine...

No Mark : Manufactured upon request only. Delivery time is about ten days after an order received.

Item Code No Mark : Manufactured upon request only. Delivery time is about ten days after an order received. S About the rigidity value A rigidity value represents the amount of deflection for the entire holder and tool when a bending load of 1 kgf (9.8 N) is applied to the tip of the tool. The smaller the numerical value is, the higher the rigidity and the more accurate the machining. A carbide, integrated-type RED screw arbor is highly rigid with low deflection, achieving machining without chatter even for deep standing-wall machining in which tool projection is long.A RED screw arbor demonstrates...

The diagrams and table data are examples of test results, and are not guaranteed values. "Epoch" , “ ” and “ ” are registered trademarks of Mitsubishi Hitachi Tool Engineering, Ltd. in Japan. Attentions on Safety 1. Cautions regarding handling (1) When removing the tool from its case (packaging), be careful that the tool does not pop out or is dropped. Be particularly careful regarding contact with the tool flutes. (2) When handling tools with sharp cutting flutes, be careful not to touch the cutting flutes directly with your bare hands. 2. Cautions regarding mounting (1) Before use, check the...