FFP MASKS
2Pages

DATASH EE T FFP MASKS PROTECTION AGAINST DUST, MIST & FUMES CHARACTERISTICS ActivForm® Automatically fits to the face. No manual adjustments by the user are necessary. DuraMesh® Masks have a strong and durable structure. ProValve New built-in valve reduces condensation from exhaled air. CERTIFIC ATION The Moldex Air Plus FFP-masks meet the requirements of EN 149:2001+A1:2009 and are CE-marked in accordance with the requirements of European Directive 89/686/EEC. The IFA (0121) Germany is responsible for both type examination (Article 10) and monitoring of production (Article 11B). The products are manufactured in an ISO 9001 certified plant. MATERIALS Filter Layer, Inner Shell, DuraMesh® : Polypropylene, Ethylene-vinyl acetate (EVA) Nose Seal, Clip: Polyethylene Head Strap: Polyester, Lycra ProValve: Polypropylene, Synthetic Rubber Low breathing resistance Pleated filter technology reduces inhalation resistance by up to 50% whilst maintaining filtration performance. Full face seal 3D face seal – like a rubber half mask – improves fit and provides optimum wearing comfort. Adjustable Strap & Flexible Clip Extra wide size adjustable straps. Flexible clip for more comfort. Dolomite clogging test Masks have passed the Dolomite clogging test, giving the user better breathing resistance for longer. 100% PVC-FREE All Moldex products and packaging are completely free from PVC. *R = Reusable. Can be cleaned, disinfected and used for more than one shift Hazard type HAZARDOUS FINE DUSTS, WATER AND OIL BASED MISTS/AEROSOLS, BIOLOGICAL AGENTS OF RISK GROUP 2 R* – Reusable The full face seal can be wiped clean and gives the option of using the mask for more than one shift. HARMFUL AND CARCINOGENIC DUSTS, WATER AND OIL BASED MISTS/ AEROSOLS, BIOLOGICAL AGENTS OF RISK GROUP 2 AND 3, CMR-SUBSTANCES

DATASHEET FFP MASKS PROTECTION AGAINST DUST, MIST & FUMES TESTING ACCORDING TO EN 149:2001 + A1 :2009 Total inward leakage Ten test subjects perform a variety of exercises. During the exercises the amount of test aerosol that penetrates the filter, face seal and valve are sampled. The total inward leakage of 8 out of 10 test subjects shall not exceed the following levels: INSTRUCTIONS FOR FITTING Category The filter penetration after loading the filter with 120 mg paraffin oil according to DIN EN 149:2001 + A1:2009 shall not exceed the following levels: 4. Ensure respirator fits secure and...