Catalogs >
MOFLON >
PROFIBUS slip ring MB500 series

PROFIBUS slip ring MB500 series
2Pages

Catalog excerpts

Industry Bus Slip Rings (high speed transmission) MB500 series is our standard series integral and precise industry bus slip ring , with bore size 50mm (suitable for <=50mm), can support Profibus, EtherCAT,CanBUS, CANOPEN, DeviceNET, CC-LINK, ProfiNET, etc. Note: If required through bore<50mm,this can be solved by adding a sleeve inside the bore. Note: 1) N channels 10A rings parallel can be used as 1 channel N*10A current. For example: 2 rings 10A parallel could be used as 1 wires 20A 2) Power 10A and signal rings number can be with flexible module configuration on customer's request. Please contact customer service for more various industrial bus configuration. Specifications Mechanical Data Parameter Electrical Data Parameter Rotating Speed See product quality level table See product quality level table Power Rated Voltage Working Temperature Insulation Resistance Operating Humidity Lead Wire Contact Material See product quality level table Lead Length AWG22#Teflon or bus cable standard length 300mm（adjustable） Housing Material aluminum alloy Insulating Strength Electrical Noise Protection Grade Part# Explanation level Product Quality Level Table Quality Level Code Working Life Contact Material VC（Common Version） Precious Metal VD（Industrial Version） VH（high-end version） Aluminum Alloy Part# List Lead Wires Color Code MB500 Series Industry Bus Slip Rings Part List Table (6 wires for 1 group colors, from 7-12, repeat the same color as 1...6, indicated with number code pipe.) MB Series Industry Bus Slip Rings MB Series Industry Bus Slip Rings Working Life Options For Custom Slip Ring Note: Below special demands can be customized. According, the delivery date will be extended 3 to 15 days; also the cost will be increased 30% to 50%. Most of our basic parts are standard and modular, which can save the cost and lead time. ① Bore diameter can be customized; cable exit way and cable length can be customized for both rotor and stator. ② Because of the structure limitation, length/height/OD can be customized on your request. ③ Support current or signal up to 200 rings. ④ Aviation plug, terminal and heat-shrink tube are optional. ⑤ Hybrid slip ring for Yaskawa/Panasonic/Siemens servo control signal, power line and encoder line. ⑥ Support mixed high speed data transmission (including Ethernet, USB, RS232, RS485, Profibus, CanBUS, CANOPEN, DeviceNET, CC-LINK, ⑧ Special environment can be customized, such as quakeproof, high temperature, etc. ⑦ Can combine temperature control signal with thermocouple signal. ⑨ Hybrid Pneumatic/hydraulic and electric slip ring can be mixed. ⑩ High temperature can up to 500 degrees. ⑬ Maximum current can up to 5000 amperes. ⑭ Military grade ⑮ Optional for underwater IP65, IP68. ⑯ Optional for stainless steel housing Technical support: technical@moflon.com

Open the catalog to page 1

MJ Series Through Bore Rotary Union passage air pressure and fluid media. With modular design, it is more stable and reliable. Pnuematic/Hydraulic rotary union can support positive pressure 90MPa and negative pressure -10MPa. With the through bore design,it can pass wires or pass other Note: 1) N channels 10A rings parallel can be used as 1 channel N*10A current. For example: 2 rings 10A parallel could be used as 1 wires 20A Pnuematic/Hydraulic rotary union is designed for rotary apparatus and it can provide safe and stable hybrid transmission for multi- 2) Power 10A and signal rings number...

Open the catalog to page 2

PROFIBUS slip ring MB500 series 2Pages

Catalog excerpts

All MOFLON catalogs and technical brochures

PROFIBUS slip ring MB500 series
2Pages