*mydirectindustry

GT2045

Product catalog summary

Overview: This document provides technical specifications and details for the GT1235 and GT2045 series of integral precision conductive slip rings. These components are designed for applications requiring compact outer diameters and specific through-hole diameters.

Specifications:

GT1235 Series: Outer diameter of 35mm, through-hole diameter of 12.7mm. If a smaller inner hole is needed, an inner sleeve can be added.
GT2045 Series: Outer diameter of 45mm, through-hole diameter of 20mm. Similarly, an inner sleeve can be used for smaller diameters.

Parts List: Both series include a range of parts numbered GT1235-S02 to GT1235-S24 and GT2045-S02 to GT2045-S24, with varying lengths and specifications.

Electrical Data:

Rated Voltage: 0~240VAC/VDC
Insulation Resistance: ≥500MΩ/500VDC
Lead Wires: AWG22 Teflon, Standard length 300mm
Dielectric Strength: 500VAC@50Hz for 60 seconds
Electrical Noise: <0.03Ω

Mechanical Data:

Working Life: 10 million revolutions
Rotating Speed: 1~1800RPM
Working Temperature: -30℃ to 80℃
Operating Humidity: 0~85% RH
Contact Material: Gold-plated
Housing Material: Aluminium alloy
Torque: 0.1N.m; +0.03N.m/6 rings
Protection Grade: IP51

Lead Wires Color Code: The document specifies a color code for lead wires, repeating every six wires.

Customization and Notes: The slip rings can be customized based on standard configurations. Multiple 10A rings can be paralleled to increase current capacity. For example, two 10A rings can be used as one 20A channel. The combination of 10A and 5A (signal) rings can be customized freely.

Contact Information: For further details or customization, contact [email protected] or visit their website at www.moflon.com.

Catalog excerpts

Compact, 45mm od through-hole diameter of 20mm (applicable to < = 20mm) (1 / 2 ", applicable to < = 12.7mm)Series integral precision conductive slip ring. standard series integral precision conductive slip ring. *Note: if the inner hole of < 12.7mm is needed, it can be solved by adding inner sleeve. *Note: if the inner hole less than 20 mm is needed, it can be solved by adding inner sleeve. The first compact outer diameter is 35mm, and the through hole diameter is 12.7mm GT:High speed slip ring GT:High speed slip ring Part# List Specifications Gt1235 Series Parts# List Length-L (mm) Part# List Electrical Data Insulation Resistance Lead Wires Lead Length Dielectric Strength Electrical Noise Mechanical Data Value Working Life Insulation Resistance Lead Wires Lead Length Dielectric Strength Electrical Noise Mechanical Data Working Life Working Temperature Rotating Speed aluminium alloy Housing Materia aluminium alloy Protection Grade Lead Wires Color Code Lead Wires Color Code RED Rated Voltage Protection Grade Value Power Contact Material Housing Materia Operating Humidity Rotating Speed Working Temperature Contact Material Electrical Data Length-L (mm) Note: N channels 10A rings parallel can be used as 1 channel N*10A current. For example: 2 rings 10A parallel could be used as 1 wires 20A. 10A,5A (signal) can combine freely in any way.It can be customized based on standard slip ring,please contact customer service for more detmails. Operating Humidity Rated Voltage Specifications Gt2045 Series Parts# List Value Power Note: N channels 10A rings parallel can be used as 1 channel N*10A current. For example: 2 rings 10A parallel could be used as 1 wires 20A. 10A,5A (signal) can combine freely in any way.It can be customized based on standard slip ring,please contact customer service for more detmails. Note:6 wires for 1 group color, from 7-12, repeat the same color as 1...6, indicated with number code pipe. Note:6 wires for 1 group color, from 7-12, repeat the same color as 1...6, indicated with number code pipe. GT Series Through Bore Slip Rings GT Series Through Bore Slip Rings Part# Explanation Part# Explanation Email: [email protected]

Open the catalog to page 1

All MOFLON catalogs and technical brochures