Specifications Electrical Data MT80158 series provides a 80mm through-bore for routing of hydraulic or pneumatic lines or hydraulic or pneumatic rotating shaft installation, and a compact 158mm outside diameter,features long life, fiber brush contact technology for ultimate performance in manychallenging applications. MT80158 series are standard, off-the-shelf products, Color-coded lead wires are used onboth the Rated Voltage Insulation Resistance stator and rotor for simplified electrical connections.It can transmit signal(2A), 10A, multiple 10A Lead Wires current when 360° degree free rotating. Lead Length Insulation Strength Electrical Noise <0.01Ω Mechanical Data Value See Product Quality Level Table Working Life Rotating Speed See Product Quality Level Table Working temperature Operating Humidity 0~85% RH See Product Quality Level Table Housing Material Aluminium Alloy Protection grade Product Quality Level Table Part# Explanation Product quality level VC-common quality version VD-industrial quality version Default=VC 06:6 rings S:signal(5A) MT:through bore slip ring 80158:80-ID 80mm;158-OD 158mm P:power ring 0610:06-6rings;10-rated 10A/ring Products Level Code Working Life Contact Material Precious Metal Lead Wires Color Code Ring Part# List (6 wires for 1 group color, from 7-12, repeat the same color as 1...6, indicated with number code pipe) MT80158 Series Parts# List Part# Options For Custom Slip Ring MT Series Through Bore Slip Rings MT Series Through Bore Slip Rings Contact Material Note: Below special demands can be customized. According, the delivery date will be extended 3 to 15 days; also the cost will be increased 30% to 50%. Most of our basic parts are standard and modular, which can save the cost and lead time. ① Cable exit way and cable length can be customized for both rotor and stator. ② Because of the structure limitation, length/height/OD can be customized on your request. ③ Support current or signal up to 200 rings. ④ Aviation plug, terminal and heat-shrink tube are optional. ⑤ Hybrid slip ring for Yaskawa/Panasonic/Siemens servo control signal, power line and encoder line. ⑥ Support mixed high speed data transmission (including Ethernet, USB, RS232, RS485, Profibus, CanBUS, CANOPEN, DeviceNET, CC-LINK, ProfiNET, EtherCAT, etc.) ⑦ Can combine temperature control signal with thermocouple signal. ⑧ Special environment can be customized, such as quakeproof, high temperature, etc. ⑨ Hybrid Pneumatic/hydraulic and electric slip ring can be mixed. ⑩ High temperature can up to 500 degrees. ⑪ High pressure can up to 110KV ⑫ Rotating speed can up to 10000RPM ⑬ Maximum current can up to 5000 amperes. ⑭ Military grade ⑮ Optional for underwater IP65, IP68. ⑯ Optional for stainless steel housing Technical support: [email protected] Note: N channels 10A rings parallel can be used as 1 channel N*10A current. For example: 2 rings 10A parallel could be used as 1 wires 20A. 10A,5A (signal) can combine freely in any way.It can be customized based on standard slip ring,please contact customer service for more detmails. Email: [email protected]

Specifications Electrical Data MT80158 series provides a 80mm through-bore for routing of hydraulic or pneumatic lines or hydraulic or pneumatic rotating shaft installation, and a compact 158mm outside diameter,features long life, fiber brush contact technology for ultimate performance in manychallenging applications. MT80158 series are standard, off-the-shelf products, Color-coded lead wires are used onboth the Rated Voltage Insulation Resistance stator and rotor for simplified electrical connections.It can transmit signal(2A), 10A, multiple 10A Lead Wires current when 360° degree free rotating....