*mydirectindustry

Catalogs
MOFLON
Capsule slip ring MMC181 series

Capsule slip ring MMC181 series

Product catalog summary

Overview: The document provides detailed specifications and options for MMC181 and MMC182 series miniature capsule slip rings. These components are compact, with an outer diameter of 11.6mm and a length of 18.2mm, and are designed for simplified electrical connections using color-coded lead wires.

Specifications:

Electrical Data: Rated voltage is 0~220VAC/VDC with insulation resistance ≥100MΩ/220VDC. Lead wires are AWG#28 teflon with a standard length of 300mm, adjustable. Dielectric strength is 500VAC@50Hz for 60 seconds, and electrical noise is <0.01Ω.
Mechanical Data: Operating temperature ranges from -30℃ to 80℃ with humidity levels of 0~85% RH. Torque is specified at 0.005N.m with an additional 0.02N.m per 6 rings, and the protection grade is IP51.

Product Variants:

MMC181: Standard version with common quality.
MMC1819: High-end version with enhanced performance, longer working life, higher rotating speed, and lower noise.
MMC182: Standard version with a maximum speed of 250RPM and a working life of over 10 million cycles.
MMC1829: High-end version with a maximum speed of 1000RPM and a working life of over 30 million cycles.

Customization Options: Options include flange mounting, specified connectors, heat-shrink tubes, longer lead lengths, high-temperature versions, and military-grade specifications.

Additional Information: The document includes a color code for lead wires and notes on using parallel channels for increased current capacity. For example, two 2A rings in parallel can be used as one 4A wire.

Catalog excerpts

MMC181 Miniature Capsule Slip Rings Part# List MMC182 Series Part# List Part# Total Wires MMC181 slip rings are small and compact with OD 11.6mm * L 18.2mm, standard, off-the- Note:N channels 2A rings parallel can be used as 1 channel N × 2A current. For example: 2 rings 2A parallel could be used as 1 wires 4A please contact sales for special requirements shelf.Color-coded lead wires are used on both the stator and rotor for simplified electrical connections. Using a 90° V-groove ring design for each ring. MMC181 is the high-end version corresponding to MMC181, It has higher performace and longer Product Quality Level Table working life, higher speed rotating speed,low noise. Working Life Housing Material Lead Wires Color Code Ring Options for custom slip ring · MMC1829 is the high-end version corresponding to MMC182. · Optional flange mounting. · Specified connectors and Heat-shrink tube. · Longer lead lengths available. · High temperature is optional. · Military Grade. Part# Explanation MMC:miniature capsule slip ring 181:common quality version 1819:high-end quality version Specification Electrical Data Value Parameter Power Rated Voltage Insulation Resistance Lead Wires Lead Length Dielectric Strength Electrical Noise <0.01Ω Mechanical Data Value Parameter Working Life See Product Quality Level Table Rotating Speed See Product Quality Level Table Working Temperature Operating Humidity Contact Material See Product Quality Level Table Protection Grade See Product Quality Level Table

Open the catalog to page 1

Open the catalog to page 2

All MOFLON catalogs and technical brochures