Issue-10-Obstacle-40-Candela
1Pages

Visual Signals - Obstacle Marking 40 Candela BEACONS Rubber Seal Obstacle Marking : Low Intensity Mobile Obstacles > 40 Candela Product overview This range of beacons has been designed primarily for use on vehicles. There are two mounting options, either a permanent fix by two screws into the base of the beacon or a magnetic base. Both beacons are pulsed through an internal circuit to generate an On/ Off cycle to product the required flash rate. The typical application is for marking mobile obstacles in or around aerodromes. Emergency & Security vehicles are designated with Blue lenses and all others shall be Amber. The minimum light output for each colour is 40 Cd. 2 Holes x No 6 self tap screw x 50mm CRS Ferrite Magnet BASE OPTIONS • Conforms to ICAO Annexe 14 Volume 1, Low Intensity Type C Newton force calculated to provide a fix on flat surfaces of upto 80 MPH (subject to conditions) Light Source: • Permanent fix base is supplied with 140mm of flying lead with male & female bullet connectors • 3600 light output around the vertical axis • 1800 light output above the horizontal axis • Dustproof and Weatherproof Material ADD THE FOLLOWING LENS CODES TO THE PRODUCT WHEN ORDERING Rubber Seal • Magnet base provides a 35 40 Candela > Ordering Information UV Stable Polycarbonate Lens Acetal Base with Neoprene Cover AUTOMOTIVE