Datasheet - Sounder/Beacon LEDA125

Product catalog summary

Overview: The LEDA125 Series is designed for security, process control, and industrial applications requiring low maintenance and long life. It features a UV stable polycarbonate lens and ABS plastic base, suitable for surface or wall mounting with optional accessories.

Specifications: The beacon offers three flash rates (60, 130, 190 FPM) and a static mode, selectable via a DIP switch. It operates within a temperature range of -25 to +55°C and is rated IP65 for protection. The unit includes 48 SMT LEDs and two synchronized Piezo buzzers for combined audible and visual warnings.

Electrical Characteristics: Available in 24vDC and 85-280vAC/DC, the beacon has low current consumption, with specific values depending on the mode and voltage. For example, at 24vDC, current consumption ranges from 103mA to 212mA, while at 230vAC, it ranges from 29mA to 47mA.

Performance: The effective candela values vary by lens color: Amber (25.32 Cd), Red (33.03 Cd), Blue (8.39 Cd), Green (23.4 Cd), and Clear (57.31 Cd).

Accessories: Optional accessories include a cage guard, angled wall bracket, and various lens colors (Amber, Red, Blue, Green, Clear). Note that the cage guard and wall bracket cannot be used simultaneously.

Ordering Information: The product codes vary based on color and voltage, with specific codes for each configuration. The net weight is 0.222 kg for 24v and 0.258 kg for 85-280v, with gross weights slightly higher.

Catalog excerpts

The LEDA125 Series is suitable for security, process control & industrial applications, where low maintenance and long life are the pre-requisite requirement. These beacons offer three flash rate options and a static option, which are all selectable via a 4 Way DIP switch located on the PCB: 1. Standard Flash (60FPM) 2. Double Flash (130FPM) 3. Rapid Flash (190FPM) 4. Static Mode (No Flash) An advantage of the static mode is that it can be controlled via a remote source (Control Panel / PLC etc) offering the potential of a remote flash option. The design allows for termination inside the enclosure via an M12 sealing grommet located in the base of the product. This model incorporates two Piezo Buzzers situated in the base of the unit, that are synchronised to the flash mode offering a combined audible & visual warning device. If you only require a visual signal with the same mounting base, please refer to our LEDD125 Datasheet. APPROVALS & CONFORMITIES Features_ • Continuously rated • Suitable for surface or wall mounting • Optional wall bracket - See accessories on page 2 • 360° light output around the vertical axis • UV Stable Polycarbonate Lens • UV Stable ABS Plastic Base ® [email protected] 9 77 Upper Conybere Street [email protected] Highgate, Birmingham

Open the catalog to page 1