The LEDA100 ECO Series is suitable for light commercial & industrial signalling applications where local indication is required. The range has been designed to offer a cost-effective solution against more traditional incandescent types of lamps, whether through new plant and machinery installations or existing facility upgrades. The design allows for termination inside the enclosure through the base. The LEDA100 Sounder/Beacons have two selectable stages of alarm, Flashing or Continuous (Static) mode, which are selectable via a Jumper Link on the PCB. The design also allows for a third wire connection giving flexibility to switch from a pre-set Static Mode to Flashing. One Piezo Buzzer is situated in the base of the unit that is synchronized to the flash rate, offering a combined audible & visual warning signal. Please note, the Buzzer cannot be controlled independently of the light. If you require a different mounting Base option, please refer to our LED100 or LEDS100 Datasheet. If you only require a visual signal with the same mounting base, please refer to our LEDD100 Datasheet. APPROVALS & CONFORMITIES Features_ • Continuously rated • Suitable for surface or wall mounting • Optional wall bracket - See accessories on page 2 • 360° light output around the vertical axis • UV Stable Polycarbonate Lens • UV Stable ABS Plastic Base ® [email protected] 9 77 Upper Conybere Street [email protected] Highgate, Birmingham

MOFLASH* 1SIGNALLING 1 Ordering Information Part Code APPROVALS & CONFORMITIES ® [email protected] 9 77 Upper Conybere Street [email protected] Highgate, Birmingham