X700 The X700 series is suitable for Industrial & Marine signalling applications where a more powerful visual signal is required. These Beacons are of the flashing mode type (single stage alarm). Xenon Beacons (sometimes called strobes) are controlled via a PCB and put out a brief, but a very bright flash of white light by ionizing and then discharging a large current through Xenon gas. The product is designed to work both independently or as part of a synchronized string of Beacons (maximum of 10 in a string). The design also incorporates a fault check mode when used in a synchronous string. This will show as a positive signal on the line, and the string will stop flashing. Possible faults are Power failure, Synchronization failure, Capacitor failure or Tube failure. The product also offers a choice of four flash rates and two power settings, which are selectable via a fourway DIP Switch located on the PCB. Termination is via conduit knockouts located on all four sides of the Base and can incorporate M16 up to M32 Cable Glands. Termination is made to the PCB inside the enclosure. Features_ • Continuously rated • Suitable for surface or wall mounting • Flash Synchronisation • Multiple functionality • 180° light output above the vertical axis • For use in industrial and marine applications Material • UV Stable Polycarbonate Lens UL94 HB • UV Stable Polycarbonate Base 746C 5” APPROVALS & CONFORMITIES ® [email protected] 9 77 Upper Conybere Street [email protected] Highgate, Birmingham

MOFLASH* 1SIGNALLING 1 Ordering Information Part Code APPROVALS & CONFORMITIES ® [email protected] 9 77 Upper Conybere Street [email protected] Highgate, Birmingham