The X401/400 Series is suitable for security & general industrial signalling applications where a more robust and powerful signal is required. These beacons are of the flashing mode type (single stage alarm). Xenon Beacons (sometimes called strobes) are controlled via a PCB and put out a brief, but a very bright flash of white light by ionizing and then discharging a large current through the Xenon gas. The design allows for termination to a three-way Terminal Block located to the underside of the Base, or directly to the PCB via an M20 knockout. This series incorporates an internal Fresnel lens designed to maximise the light intensity. A double flash option is available (activated by a slide switch on the PCB) that extends the signal duration making it more noticeable to the human eye. The DC unit is factory set at 24v but a slide switch on the PCB can change it to 12v operation. If you require a different mounting Base option, please refer to our X401/400 Datasheet. Features_ • Continuously rated • High Brightness • Suitable for surface or wall mounting • Optional wall bracket - See accessories on page 2 • 360° light output around the vertical axis • 180° light output around the horizontal axis • UV Stable Polycarbonate Lens • UV Stable ABS Plastic Base ® [email protected] 9 77 Upper Conybere Street [email protected] Highgate, Birmingham

Part Code APPROVALS & CONFORMITIES ® [email protected] [email protected] [email protected] 11 Upper Conybere Street Highgate, Birmingham B12 0EB, England